Rosewill RC216 User Manual
SATA II / ATA 133 PCIe Card
RC216
User Manual
SATA II / ATA 133 PCIe Card RC216
Content
User Manual
• Features and Benefits ......................................................................
• Connectors ........................................................................................
• System requirement ..........................................................................
• Package contents .............................................................................
• Hardware Description ......................................................................
• Step by step photo installation of Magic Switch ............................
• Hardware installation .........................................................................
• RAID 0 ...................................................................................
• RAID 1 ....................................................................................
• RAID JBOD ............................................................................
• RAID 0+1 .................................................................................
• Delete RAID disk drive ...........................................................
• Solve Mirror Conflict .........................................................................
• Rebuild Mirror Drive .........................................................................
• BIOS Configuration ..........................................................................
01
01
01
01
02
03
04
05
05
05
06
06
06
07
07
• Driver installation
• For Windows 2000/XP/Server 2003 32bit .............................
• For Windows XP/Server 2003 64bit ......................................
• For Windows VISTA 32bit ......................................................
• For Windows VISTA 64bit ......................................................
• To Verify Driver installation ..............................................................
07
08
09
09
10
SATA II / ATA 133 PCIe Card RC216
User Manual
SATA II / ATA 133 PCIe Card
Features and Benefits
• Compliant with one-lane 2.5Gb/s PCI Express specification
• Compliant with Serial ATA 1.0 specification
• Supports Serial ATA Generation 2 transfer rate of 3.0Gb/s
• Supports Native Command Queue (NCQ) on SATA ports
• Provide three independent channels to connect two SATA and two PATA hard disk drives
• Supports up to UDMA6 transfer mode of PATA
• Supports up to 4 storage device connection
• Supports RAID 0, 1, 0+1 and JBOD functions
• Supports Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit
Connectors
• 2 x internal SATA connectors
• 2 x external eSATA connectors
• 1 x PATA connector
System Requirements
• Windows® 2000, XP/2003 32/64 bit, Vista 32/64bit
• PCI Express-enabled system with an available PCI Express slot
Package Contents
• 1x PCIe SATA II 300 + PATA RAID Card
• 1x Driver CD
• 1x SATA Data Cable
• 1x ATA 133 IDE Cable
• 1x Manual
Note: Contents may vary depending on country/market
1
SATA II / ATA 133 PCIe Card RC216
Hardware Description
User Manual
IDE (ATA)
Con 3 (eSATA)
Con 4 (eSATA)
Con 1 SATA Connector (internal)
Con 2 SATA Connector (internal)
Con 3 eSATA Connector (external)
Con 4 eSATA Connector (external)
3 2 1
Con 1 (SATA)
Con 2 (SATA)
Jumper
J4
J3
J2
J1
3 2 1
J8
J7
J6
J5
Jumper Settings
JP Description Active port
J1-J4 1-2 close Enable SATA Connector Con 1
2-3 close Enable SATA Connector Con 3
J5-J8 1-2 close Enable SATA Connector Con 2
2-3 close Enable SATA Connector Con 4
Note :
There are four SATA ports in PCIe SATA II 300 + PATA Raid Card. We name these ports CON1
to CON4. Ports CON1 & CON2 are internal SATA ports and CON3 & CON4 are external eSATA
ports. By changing the jumper setting on the PCIe SATA II 300 + PATA Raid Card that allows you
to select between external and internal ports to use. By default, Port CON1 & CON2 are working.
2
Loading...