Rosewill RC-100 User Manual
USB 2.0 2-Port PCI Adapter RC100
User Manual
USB 2.0 2-Port PCI Adapter RC100
User Manual
System Requirements
• Windows® 98SE, 2000, ME, XP(Pentium® or K6® - class processor -266 MHz or higher)
• Mac® OS 10.1 or Above
• 32MB of RAM
• Available PCI Slot
• CD-ROM Drive(for driver installation)
Specifications
• VIA VT6212L chipset
• USB 1.1 and 2.0 Compliant
• Up to 480 Mbps (Megabits-Per-Second) Data Transfer Rate
• 40 Times Faster Than The USB 1.1
• Hot Swappable Plug-n-Play
• 2 External Type A USB 2.0 Ports
• 2 Type A USB 2.0 Ports by connecting an optional 2-Port USB cable to connector USB3
Package Contents
• 1 x USB 2.0 PCI Card
• 1 x Driver CD
• 1 x User Manual
Hardware Installation
Be careful with polarity of the USB connector (USB3). Check the pin assignment while you connect the USB cable.
1
USB 2.0 2-Port PCI Adapter RC100
Pin No. Definition
1 Power
2 Power
3 USB3 D4 USB4 D5 USB3 D+
6 USB4 D+
User Manual
7 GND
8 GND
9 No Pin
10 NC
1. Remove your computer’s cover. (Note: If necessary, consult your computer’s manual for
help in removing the cover)
2. Locate an available PCI slot and, if necessary, remove the expansion slot bracket.
3. Insert the USB 2.0 Card gently but firmly until the card is fully seated.
4. Fasten card to the computer case using a screw.
5. Replace the computer cover.
Driver Installation
Windows®98SE Installation
Make sure your version of Windows® is 98 Second Edition by check the “Properties” of “My
Computer”.
1. Windows will detect new hardware and start the “VIA Tech 3038 PCI to USB Universal Host
2
Loading...