Rosewill R-BC-01 User Manual
-POLE
BATTERY CHARGER BAY
LED INDICATORS
LCD DISPLAY
+POLE
BATTERY SELECTION SWITCH
POWER LIGHT
CHARGING (9V BATTERY)
LED LIGHT (9V BATTERY)
DC SOCKET
9
10
8
7
6
5
4
3
2
1
Ni-MH
Ni-Cd
ALK
R-BC-01 User manual
1
Battery
TYPE
Function
LED Indication
LCD display word
LCD capacity
Indication
Ni-Cd
Discharge
Yellow
DIS
Blinking
downward
Charging
Red
CHA
Flashing upward
Fully charged
Green
OK
Fully charged
Ni-MH
Charging
Red
CHA
Flashing upward
Fully charged
Green
OK
Fully charged
Alkaline
Charging
Red
CHA
Flashing upward
Fully charged
Green
OK
Fully charged
LCD & LED Display
2
Ni-Cd
Ni-MH
Alkaline
Battery voltage
is very low short
Battery can’t recharge
Off
BAD
Dear Customer,
Thank you for purchasing the ROSEWILL universal battery charger. This product is an excellent
environmentally friendly choice providing a comprehensive and versatile solution to keeping your
batteries charged when you need them and minimizing battery waste.
The device you have purchased is equipped with the best available technology.
The product meets the requirements of current European and National guidelines. Conformity has
been established and the relevant statements and documents have been deposited at the
manufacturer.
This battery charger has the following features:
Easy to use
Intelligent microprocessor controlled
With negative delta V cut-off function
Rechargeable batteries in all capacities 1-4 pcs size AAA ,AA ,N,C ,D& 1PCS 9V
Recharges batteries in SINGLE or GROUP as the ROSEWILL Charger microprocessor
monitors each charging bay individually
With short-circuit protection
3
With both LED and LCD display ,the status of each batteries charge cycle can be seen
easily
With individual maximum timer control for overcharge protection.
Charges Ni-Cd (Nickel Cadium), Ni-Mh(Nickel Metal Hydride), Alkaline *,
RAM(Rechargeable Alkaline Manganese)
Note on standard alkaline batteries:
The ROSEWILL Charger can charge most types of alkaline batteries. Please use the setting “ALK”
on the sliding front panel of your charger. Because of the chemistry of standard alkaline batteries
they cannot be recharged nearly as many times as standard rechargeable type batteries like Ni-Cd
or Ni-MH batteries. However, the ROSEWILL Charger uses a recharge current of 130 mA and the
entire charging process is controlled intelligently by microprocessor which can recharge most
standard alkaline batteries to 75-90% of their original capacity upwards of 30+ times depending on
the quality of the battery. Please note standard alkaline batteries should be completely drained
before recharging with your ROSEWILL Charger.
On an environmental note, the cost/performance comparison between standard alkaline batteries
and rechargeable batteries such as Ni-Cd (Nickel Cadmium) and Ni-MH (Nickel Metal Hydride) is
overwhelmingly in favour of rechargeable batteries, we think them the obvious environmental
choice.
We kindly request the user to follow the operating instructions to preserve this condition and to
ensure safe operation.
The device is intended for charging rechargeable Ni-Cd, Ni-MH and RAM batteries of type of
4
Loading...