Rosewill R800N User Manual

TFT-LCD COLOR MONITOR

USER’s MANUAL

R800N

Menu:

1.Indroduction

Product Description .................... .Page.2

Package Contents......................... Page.2

Product Features.......................... Page.2

Cleaning...................................... Page.3

Precautions.................................. Page.3

2.Control Function

OSD Button ................................. Page.6

OSD Control.................................Page.7

HOT Control................................ Page.8

3.Inputs Diagram

Inputs.......................................... Page.9

4.Display Angle....................................Page.10

English

5.Product Specification.........................Page.11

6.Display Modes...................................Page.12

7.Ser vice Information...........................Page.13

1

Introduction

Product Description

Congratulations on your purchasing this new generation of monitor.
Your LCD monitor incorporates high quality display into a small light
weighted module. It has power-saving capabilities and emits no X-ray
radiation. You will certainly benefit from this monitor in lots of way to
name some of them, comfort safety and environmental protection.

This LCD monitor incorporates 18 color active matrix thin-film-

transistor (TFT) liquid crystal display to provide superior display per-

formance. A maximum resolution of XGA 1024X768 is ideal for

designs that enhance this LCD monitor s performance are Plug & play
compatibility, audio system and OSD (On Screen Display) controls.

Package Contents

Included with your LCD monitor are following items:

18 TFT LCD monitor
15pin D-sub signal cable
AC power cable
User,s manual
Sound Card Cable (Option)

Product Features

High contrast color TFT LCD display support resolution up to XGA

1024X768

Compatible with IBM VGA, VESA, and Macintosh standards.

Imbedded audio system provides sound performance. (Option)

AV-IN and S-video use.(option)

AUDIO-1, and PC line in sound application. (Option)

English

2

Cleaning

Gently wipe screen with a clean camel hair lens brush, or a soft, clean,
lint-free cloth.
This removes dust and other articles that can scratch the screen,
Do not apply pressure to the screen surface when wiping it clean.
Do not pour or spray and liquid directly onto the screen or case of the
LCD monitor.
Chemical cleaners have been reported to damage the screen or the LCD
monitor.

English

Precautions

Read all these instruction and save them for later use.
Follow all warning and instructions on the product.

Product
Do not block the vent holes in the case.
Do not insert sharp objects or spill liquid into the LCD monitor through

cabinet slots.
They may cause accident fire, electric shock or failure.
Disconnect the power plug from the AC outlet if you will not use it
for an indefinite period of time.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks.
Do not touch the screen directly with your fingers. You may damage

the screen, and oil from your skin is difficult to be removed.
Do not apply pressure to screen. The LCD is very delicate.

Power
Use the type of power indicated on the marking label.

Plugs
Do not remove any of the prongs of the monitor,s three-pronged power
plug.
Disconnect the power plug from the AC outlet under following
conditions:
If you will not use it for an indefinite period time.
When the power cord or plug is damaged or frayed.
If the product does not operate normally when the operating instructions
aye followed.

3

Adjust only those controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal
operation.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicating a
need for service.

Power and extension cords
Do not allow anything to rest on the power cord.
Do not locate this product where persons will walk on the cord.
Use the proper power cord with correct attachment plug type. If the
power source is 120V AC, use a power cord that has UL and C-UL
approvals. If the power source is a 240V AC supply, use the tandem
(T blade) type attachment plug with ground conductor power cord that
meets the respective European country,s safety regulations, such as
VDE for Germany.
.

Do not overload wall outlets or power cords. Ensure that the total of all
units plugged into the wall outlet does not exceed 10 amperes.
Ensure that the total ampere ratings on all units plugged into the
extension cord is not above the cord,s rating.
If the power supply cord, which came with your monitor, is to be
connected to the PC instead of the wall outlet, this equipment is to be
used with UL/TUV approved computers with receptacle rated
100~240V AC,50/60Hz,1.0A(minimum).
Environment
Place the monitor on a flat and leveled surface.
Place the monitor in a will-ventilated place.
Keep the monitor away from:
Overly hot, cold or humid places, places directly under sunlight, dusty
surroundings, equipment that generate strong magnetic fields.

English

4