Gaming Case
Quick User Guide
Table of Contents
• Product Overview
Disassembly ...................................................... 02
Accessory Box ................................................... 03
• Installation Guide
1. Open the Unit ................................................ 04
2. Install the Power Supply ................................ 05
3. Install Motherboard ........................................ 06
4. Install Add-on Card ........................................ 07
5. Install 3.5”/2.5” HDD/SDD ............................. 08
6. Care ............................................................... 09
7. Options .......................................................... 10
• Specications Table ........................................... 12
Front I/O Cable Pinout ....................................... 13
Front I/O ............................................................. 13
Thank you for purchasing a Rosewill Computer Case
Please read the instruction manual before using and
retain it for your future reference.
1
Gaming Case
Product Overview
Disassembly (components vary by country)
Cooling Fan
HDD Cage
SSD
Plates
Quick User GuidePRISM S500
Side Panel
Glass Panel
Front View Right Side View Rear View Left Side View
477 mm
210 mm
SSD/HDD
Plate
Cooling FanDust Filter
475 mm
2
Gaming Case
Accessory Box
Image Part Name Qty Function/Component
Quick User GuidePRISM S500
Screw-A (6-32 x 6mm) 5 PSU
Screw-B (6-32 x 5mm) 22
Screw-C (M3 x 5mm) 20 2.5” SSD
Standoff 9
Nut Setter 1
Cable Tie 10 Cable Management
Velcro Strap 4 Cable Management
Micro Fiber Towel 1 Tempered Glass Cleaning
Motherboard
3.5” HDD
Motherboard
(Pre-Installed)
Standoff Installation
(Optional: Standoffs are
Pre-Installed)
3
Gaming Case
Installation Guide
1. Open the Unit
1-1. Loosen the thumbscrews and take off panel R and L (Figure 1).
1
Quick User GuidePRISM S500
Simply loosen screws to
•
remove side panel
4
Gaming Case
Quick User GuidePRISM S500
2. Install the Power Supply
2-1. Set the power supply unit (PSU) at the top of the case and secure with Screw-A (Figure 2).
2
5
Gaming Case
Quick User GuidePRISM S500
3. Install Motherboard
3-1. Secure the motherboard down onto the pre-installed standoff with Screw-B (Figure 3).
3
6
Gaming Case
4. Install Add-on Card
4-1. Loosen the screws to open the cover panel/slot cover (Figure 4a).
4a
4-2. Install the add-on card and secure with screws (Figure 4b).
Quick User GuidePRISM S500
4b
7
Gaming Case
Quick User GuidePRISM S500
5. Install 3.5”/2.5” HDD/SDD
5-1. Take out the 3.5”/2.5” HDD/SDD trays/plates from the chassis (Figure 5a/5b/5c).
5a
5b
5c
5-2. Secure the 3.5" drive onto the tray/plate with Screw-B (Figure 5d/5e).
5d
5e
5-3. Secure the 2.5” drive onto the tray with Screw-C (Figure 5f/5g/5h).
5f 5g 5h
* If drive is installed on 5e or 5g, water cooling radiator cannot be added.
5-4. Put the tray/plate back onto the chassis and secure with screws.
8
Gaming Case
Quick User GuidePRISM S500
6. Care
To prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumbscrews (Figure 6a).
6a
6-2. Clean the dust lters on the bottom regularly to ensure adequate airow (Figure 6b).
6b
9
Gaming Case
Quick User GuidePRISM S500
7. Options
7-1. LED Light Mode
Press LED light button briefly:
RGB 1 (steady-rainbow) > RGB 2 (owing-rainbow) > RGB 3 > RGB 4 > RGB 5 (seven-
color-breath) > RGB 6 (seven-color-one-way-billboard) > (seven-color-two-way-billboard) >
Red > Green > Blue > White > Yellow > Cyan > Pink
Press LED light button and hold for >1.5 seconds:
LED light turns off.
7-2. Liquid Cooling Radiator Installation
Installing water cooling radiator on the side:
a. Unscrew to remove the drives plate (Figure 7a).
7a
b. Secure the radiator with screws (Figure 7b).
10
7b
Gaming Case
Installing water cooling radiator on the bottom:
c. Remove the bottom dust lter (Figure 7c).
7c
d. Secure the radiator with screws and put the dust lter back (Figure 7d).
Quick User GuidePRISM S500
7d
11
Gaming Case
Specifications Table
Model
Model Name PRISM S500
Specifications
Type ATX Mid Tower
Color Black
Case Material Steel / Tempered Glass
With Power Supply No
Power Supply Mounted Top
Motherboard Compatibility E-ATX, ATX, Micro ATX
With Side Panel Window Yes / Tempered Glass Side Panel
Expansion
External 5.25" Drive Bays 0
Internal 3.5" Drive Bays 3 (0)
Internal 2.5" Drive Bays 2 (5)
Expansion Slots 7
Front Ports
2 x USB 3.0
Front Ports
120 mm Fans
Dimensions 8.27” x 18.7” x 18.5” (W x H x D)
Weight 17.6 lbs
HD Audio In/Out
LED Light Control
Cooling System
3 x Bottom RGB LED (Pre-Installed)
2 x Side (Optional)
1 x Rear RGB LED (Pre-Installed)
Physical Specifications
Quick User GuidePRISM S500
12
Gaming Case
Features
• Tempered Glass Side Panel
• Pre-Installed 4 x 120mm RGB LED Fans
• I/O Ports: 2 x USB 3.0, HD Audio In/Out, LED Light Control
• Supports up to 2 x 120mm Fans / 240mm Water-Cooling Radiator on the side, 3 x 120mm Fans
/ 360mm Water-Cooler on the bottom, 1 x 120mm Fan at the rear
• Supports up to 160mm tall CPU Cooler
• Supports up to 440mm Graphics Card
• Easy-Access Bottom Dust Filter
NOTICE: Please make sure your motherboard is equipped with on-board USB 3.0 socket before
purchasing
Quick User GuidePRISM S500
Front I/O Cable Pinout
USB 3.0 CONNECTOR HD Audio CONNECTOR
Front I/O
Mic.
HD Audio
USB 3.0
LED Switch
Power
13
Technical Support Information
techsupport@rosewill.com 1-800-575-9885
---------------------------------------------------------------------------------Thank you for purchasing a quality Rosewill product.
Please register your product at www.rosewill.com
for complete warranty information and support for your product.
PRISM S500_A
Loading...