PCI 1394a Card 3+1 Ports
User Manual
PCI 1394a Card 3+1 Ports RC-507 User Manual
Features and Benefits
VIA chipset
PCI 32-bit 33MHz Interface
Compliant IEEE 1394-1995, 1394a (rev. 1.1) and OHCI Interface Specification 1.0
Supports data transfer rates of 100, 200 and 400 Mbps
Hot-swapping features allows you to connect/disconnect devices without powering down
your system
Adds four IEEE 1394 (FireWire) ports to your PC for high-speed I/O connectivity and
support up to 63 devices
One (1) internal IEEE 1394 port (Sharing with first external IEEE 1394 port P2)
Supports various brands of DV camcorders including Sony, Panasonic, Canon, JVC,
Sharp and more
Supports Windows® XP/Server 2003/Vista/7 (32/64 bit)
Connectors
2 x external IEEE 1394a 6-pin connectors
1 x external IEEE 1394a 4-pin connector
1 x internal IEEE 1394a 6-pin connector
System Requirements
Windows® XP/Server 2003/Vista/7 (32/64 bit)
Available PCI slot
1
PCI 1394a Card 3+1 Ports RC-507 User Manual
Package Contents
1 x VIA PCI IEEE 1394 Adapter
1 x User’s Manual
Optional Accessories
IEEE 1394a Cable
Ulead Video Studio CD
Hardware Description
Before installing the VIA PCI IEEE 1394 Adapter, please see the photo below highlighting the
available IEEE 1394 ports of the card.
2
PCI 1394a Card 3+1 Ports RC-507 User Manual
Note: The Internal Port (P1)) shares with first External Port (P2). DO NOT use P1 and P2
at the same time.
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the
motherboard. Push the board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
3
PCI 1394a Card 3+1 Ports RC-507 User Manual
Driver Installation
Windows® XP/Server 2003/Vista/7 will automatically detect and install the correct driver for the
VIA PCI IEEE 1394 Adapter. Make sure that the driver has been installed correctly, right click My
Computer, then click Manage, click Device Manager. The Device Manager window opens.
Scroll to the IEEE 1394 Bus host controller icon and click on the plus symbol, the VIA OHCI
Compliant IEEE 1394 Host Controller should be displayed.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : w ww.rosewill.com for complete warranty information an d future support for your
product.
4
Loading...