Rosewill N900UBE User Manual

Wireless N Dual Band Adapter N900UBE

Quick Installation Guide

Wireless N Dual Band Adapter N900UBE Quick Installation Guide

Safety Information:

In order to keep the safety of users and your properties, please follow the following safety instructions:

1. This USB wireless network card is designed for indoor use only. DO NOT expose this network card to direct sun light, rain, or snow.

2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. Also, do not left this wireless network card in the car in summer.

3. This network card is small enough to put in a child‟s mouth, and it could cause serious injury or could be fatal. If they throw the network card, the card will be damaged. PLEASE KEEP THIS NETWORK CARD OUT THE REACH OF CHILDREN!

4. This network card will become hot when being used for long time (This is normal and is not a malfunction). DO NOT put the network card on a paper, cloth, or other flammable objects after the network card has been used for a long time.

5. There‟s no user-serviceable part inside the network card. If you found that the network card is not working properly, please contact your dealer of purchase and ask for help. DO NOT disassemble the network card by yourself, warranty will be void.

6. If the network card falls into water, DO NOT USE IT AGAIN BEFORE YOU SEND THE CARD TO THE DEALER OF PURCHASE FOR INSPECTION.

7. If you smell something strange or even see some smoke coming out from the network card,

switch the computer off immediately, and call dealer of purchase for help.

Wireless N Dual Band Adapter N900UBE Quick Installation Guide

Overview

Thank you for purchasing Rosewill‟s N900UBE. This is an extremely high-speed 802.11a/b/g/n dual band wireless network USB Adapter. This wireless network adapter is transferring data at a transfer rate of 450Mbps at both 2.4GHz and 5GHz.

N900UBE with an easy-to-install USB 2.0 interface and external antenna, setting up this wireless adapter will be just as easy!

1.1 Package Content

Before getting started, please verify that your package includes the following items:

1. Rosewill N900UBE Wireless Dual Band USB Adapter x 1

2. Quick Installation Guide x 1

3. Resource CD x 1, including:

 Wireless Utility and Driver  User Manual

 Quick installation guide x 1

Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.

1.2 System Requirement

You must have at least the following  A desktop PC or Notebook with An empty USB 2.0 port (May not be able work with USB 1.1

port, performance will be greatly reduced)

 At least a 300MHz processor and 32MB of memory  Windows OS for WinXP, Vista, and 7 or Mac OS 10.5, 10.6, 10.7  At least 100MB of available disk space  A CD-ROM Drive  A 802.11n、802.11g or 802.11a/b Wireless (and Dual Band) Access Point/Router (for

infrastructure Mode) or another 802.11n、802.11g or 802.11b wireless (and Dual Band) adapter (for Ad-Hoc; Peer-to-Peer networking mode).

Installation Guide

2.1 Hardware Diagram

1. USB Connector

Wireless N Dual Band Adapter N900UBE Quick Installation Guide

2. External Wireless Antenna

3. Link/Activity LED

4. WPS Button (Press to activate WPS pairing mode)

2.2 Dual Band Wireless Adapter Driver and Utility Installation

Please follow the following instructions to install your new wireless network card:

1. Insert the USB wireless network card into an empty USB 2.0 port of your computer when computer is switched on. Never use force to insert the card, if you feel it‟s stuck, flip the card over and try again.

2. Insert device driver CDROM into the CD/DVD ROM drive of your computer, and execute

„Setup.exe‟ program in „Driver‟ folder.

Wireless N Dual Band Adapter N900UBE Quick Installation Guide

3. On Windows Vista / Windows 7 computer, you may see UAC (User Account Control) window

popup to warn you that this program is going to make changes to your computer, click „Yes’ to continue.

4. Please select “I accept the terms of the license agreement”, and then click „Next’

5. Select „Install driver and Ralink WLAN Utility‟ and click „Next‟ to continue. Optionally, you can select „Install driver only‟ to install wireless network card driver only, and use Windows‟ built-in wireless manager. If you don‟t know which one you should choose, select „Install driver and Ralink WLAN Utility‟ for maximum functionality.

+ 10 hidden pages