Rosewill L600N User Manual

L600N - Dual Band Wireless Router

CONTENTS

INTRODUCTION ……………………………………………………………………….…… 4

PRODUCT OVERVIEW …………………………………………………………………... 5

Package Content …..……………………………………………………………………... 5

LED Indicator ………..……………………………………………………………………... 6

Back Panel Indicator …………………………………………………………………….. 7

Side Panel Indicator ……………………………………………………………………... 8

Quick Setup Guide …………………………………………………..………………….. 9

Connecting Guide……………………………………………………………………….... 9

Wireless Connecting Guide………………………………………………..……….. 13

Configuration Guide ….……………………………………………..…………….…… 16

Web Management Guide………………………………………………………….… 16

Running Status …………………………………………………………………………… 17

Router Status ………………………………………………………………………… 18

Client List ……………………………………………………………………………… 22

Wireless Setup …….……………………………………………….…………………..… 27

Basic Setup ……………………………………….…………………………………... 28

Guest Network ……………………………….…………………………………..... 31

WPS Setup ……………………………………….………………………….……..… 32

Advanced Setup ………………………………….…………………………………. 33

Forwarding ………...………………………………….………………………………..… 36

UPnP ………..……..…………………………………….………………………..……. 37

Port Forwarding ………………………………….…………………………………. 38

Port Triggering ………………………………………….………………….………… 39

Access Control …………………………………………….…………………..…………. 40

Time of Day to Block ……………………………….…………………………….. 41

Block Sites ……………………………………………….……………..…………….. 42

Block Services ……………………………….………..…………………………….. 43

QoS Setup ………………………………….……………………………………..…… 44

Network Setup …………………………………………………………………………… 23

LAN Interface Setup ……………………………………………………………… 24

WAN Interface Setup ……………………………………………………………. 26

Dynamic DNS ………………………………….………………………………………….. 46

Static Route ……………………………………….……………………………………..... 47

E-mail Setup …………………………………….……………………………………….... 48

L600N - Dual Band Wireless Router

CONTENTS

Security Options ……………………………………………….………………….………... 49

Remote Management ……………………………………………………..….... 50

WAN Security Setup ……………………………………………………………... 51

Multicast Control …………………………………………………………………………… 54

Storage Setup ………………………………………………………………………………... 55

FTP Server Setup …………………………………………………………………… 56

FTP Server Account Manager ………………………………………………… 57

USB Browse …..……………………………………………………………………… 58

Samba Setting …………………………………………………………………..….. 59

System Tools ………………………………………………………………………..………… 60

Physical Specification ……………………………………………………………..……… 62

Troubleshooting ……………………………………………………………………..……… 64

L600N - Dual Band Wireless Router

INTRODUCTION

Thank you for purchasing this Rosewill Networking product. At Rosewill we believe that excellence is a

standard. Our customers deserve nothing less than the best. By purchasing a Rosewill product you are

choosing exceptional value, unrivaled customer service and top quality hardware. If you have any questions

please feel free to contact us. We’d love to hear from you and thank you for your support!

Support: techsupport@rosewill.com

Call Center: (800) 575-9885

FAX: (626) 271-9504

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of Rosewill Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Rosewill Inc. Copyright © 2010 Rosewill Inc. All

rights reserved.

http://www.rosewill.com

L600N - Dual Band Wireless Router

PRODUCT OVERVIEW

Package Content

- L600N Dual Band Wireless N Router

- Power Adapter for L600N

- Quick Installation Guide

- Resource CD: User Manual, Quick Installation Guide

- Mounting Stand

Note:

- Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.

- Using a power supply with a different voltage rating than the one included with the L600N will cause damage and void the warranty for this product.

L600N - Dual Band Wireless Router

PRODUCT OVERVIEW

LED Indicator

(From Left to Right)

• USB: Indicates when a USB device is connected to the USB port on

the right side of the Router. The LED blinks rapidly when data is

transmitted or received.

• Power: Indicates when the Router is powered on. The LED will

remain on.

• 2.4 GHz: Blinks rapidly when the wireless data traffic is transmitted

or received over the 2.4GHz wireless network.

• WPS: Wi-Fi Protected Setup activity. When the WPS mode is

activated the WPS LED blinks as it awaits a connection.

• Modem: Indicates when modem is connected to the modem port

on the back of the Router. The LED blinks rapidly when data is

transmitted or received.

• LAN: Indicates when a networking device is connected to a wired

port on the back of the Router. The LED blinks rapidly when wired

data traffic is transmitted or received.

• 5GHz: Blinks rapidly when wireless data traffic is transmitted or

received over the 5GHz wireless network.

L600N - Dual Band Wireless Router

PRODUCT OVERVIEW

Back Panel Indicator

(From Left to Right)

• RESET: Push once to reboot the Router. Hold down for 5-10 seconds to reset the Router back

to factory settings.

• POWER ON/OFF: Push to Power on or off the Router

• 12V 1A: Power Adapter port. Output: 12V 1A, Input: 100-240v

• Modem: RJ-45 port for connecting to your Broadband Modem

• LAN: RJ-45 ports for connecting to wired computers or other network devices. (LAN 1~4 from

left to right)

• WPS: Push and hold for 3 seconds to enable WPS push button configuration.

L600N - Dual Band Wireless Router

PRODUCT OVERVIEW

Side Panel Indicator

• WiFi ON/OFF: Push to turn ON/OFF of the WiFi Signal

• USB: Insert USB storage devices, such as USB flash drives and

external hard drives, for file sharing.

L600N - Dual Band Wireless Router

QUICK SETUP GUIDE

Connecting Guide

1. Disconnect and Unplug your Existing Router

• Disconnect the RJ45 Cable in your existing router from your computer, broadband modem,

and the power adapter from the power outlet.

2. Power Off your Modem and Remove the Backup Battery if any

• Remove the power adapter to power off your modem. Remove the modem’s backup

battery if your modem has one.

3. Connecting the L600N Wireless Router to your modem

• Plugs one end of your Ethernet Cable to the modem and the other end to your L600N’s

“modem” port

L600N - Dual Band Wireless Router

QUICK SETUP GUIDE

Connecting Guide

4. Power on the Modem

• Insert the backup battery back to your modem, and plug back your modem’s power adapter.

• Please wait 1~2 minutes the modem’s initialization to complete.

5. Power on your L600N Wireless Router and connect to your Computer

• Connects one end of the Ethernet Cable to your L600N’s LAN port

• Connects the other end of the Ethernet Cable to your Computer

• Plug in the power adapter of your L600N and power on your computer if it haven’t turn on.

6. Open your Web Browser and type in “192.168.1.1” in the address bar

• When prompted, Enter the User Name and Password

User Name: admin

Password: admin

L600N - Dual Band Wireless Router

QUICK SETUP GUIDE

Connecting Guide

7. Setup Wizard Guide

• Click on Setup Wizard.

• Select “Yes”, then “Next”

• L600N will Auto-Detect your Network and guide you through a step by step setting. (If your

connection was not detected here, you will need to setup manually under Network Setup’s

WAN Interface Setup on page 23.)

L600N - Dual Band Wireless Router

QUICK SETUP GUIDE

Connecting Guide

8. Setup Wizard Guide

• Depending on your Internet Service Provider (ISP) Type, you should

see one of the 3 types being detected.

• PPPoE: PPPoE requires you having the User Name and Password

provided by your ISP. Normally happens when using DSL connection.

• Dynamic IP (DHCP): DHCP does not require entering anything.

Usually happens when getting connection from an existing internet

Connection.

• Static IP (Fixed): Fixed requires you entering a set IP address, Subnet

Mask, Gateway IP Address, Primary DNS, and/or Secondary DNS.

These information will provided by your ISP and normally happens

when using Cable connection.

• Once complete the setting of this step, your L600N should be ready

to connect to the internet via wired connection.

L600N - Dual Band Wireless Router

QUICK SETUP GUIDE

Wireless Connecting Guide

1. Wireless Setup

• Click on Wireless Setup then Basic Setup

• At Wireless Basic Settings, you can select below as you desired.

• Adapter: 2.4G / 5G

• Region: Default is United States, but you can adjust the Region based on your

location

2. Wireless Network

• Enable Wireless Router Radio: This is turning on/off the

wireless signal

• Enable SSID Broadcast: This is to make your SSID invisible.

(Once uncheck this, You will need to enter your SSID manually

when connecting to your Wireless Signal)

• Enable Wireless isolation: This setting is to turn off the

communication among different clients, but they can still

access Internet.

L600N - Dual Band Wireless Router

QUICK SETUP GUIDE

Wireless Connecting Guide

2. Wireless Network

• Wireless Network Name: This is SSID. You can set this to your

desired name.

• Mode:

• 2.4G supports the following mode: 802.11b, 802.11b/g,

802.11b/g/n.

• 5G supports the following mode: 802.11a, 802.11a/n

• To fully utilize your L600N, we suggest 2.4G with

802.11b/g/n; 5G with 802.11a/n.

• Channel: Set Auto if you are not sure what is the best channel

to avoid neighbors’ signal interference. System will pick for you.

• Bandwidth:

• For 20M, the maximum rate is 130 Mbps (150 Mbps in

short preamble);

• For 40M bandwidth, the maximum rate is 270 Mbps

(300 Mbps in short preamble).

• Max Transmission Rate: Select one from the drop-down list

that displays all rates that the system supports. Or set at Auto

for system to adjust the best transmitting rates for you.

L600N - Dual Band Wireless Router

QUICK SETUP GUIDE

Wireless Connecting Guide

3. Security Options

• Security Options: L600N supports 4 wireless security

encryption modes. WEP, WPA-PSK (TKIP), WPA2-PSK (AES),

WPA-PSK (TKIP) + WPA2-PSK (AES). We recommend selecting

WPA-PSK (TKIP) + WPA2-PSK (AES) unless otherwise desired.

4. Complete Setting

• Once finish setting, click Apply to save and complete your

setting

L600N - Dual Band Wireless Router

CONFIGURATION GUIDE

Web Management Guide

Web Management Detail: 14 main functions on the left of the Web-based utility.

• Setup Wizard: A step by step setup on L600N

• Running Status: Detail router status and client list

• Network Setup: Allows you to set up LAN/WAN details

• Wireless Setup: Wireless Setup, SSID, WPS, Guest Network, and Advance management

• Forwarding: UPnP, Port Forwarding, and Port Triggering

• Access Control: Site/Service Block Management, QoS Setup

• Dynamic DNS: Outside DNS Management

• Static Routes: Setup Routing manually, advanced information of network require

• E-Mail Setup: E-mail Notification Setup

• Security Options: Remote Management and WAN Security (Firewall)

• Multicast Control: Function supports for Layer 2 & above switch

• Storage Setup: Allows managing USB drives and setup FTP/Samba

• System Tools: System related function setup

• Logout: Logout of the web management

L600N - Dual Band Wireless Router

CONFIGURATION GUIDE

Running Status

Running Status: You can review the device information and current

clients list here

• Router Status: Provides detail router status on Summary, System

Information, Connection status of the Internet port (Modem port),

LAN port, and Wireless Port (2.4G and 5G), and traffic statistics of

each port.

• Client list: Displays information of computers connected to the router,

including the IP address, the device name, and the MAC address of

each computer.

L600N - Dual Band Wireless Router

CONFIGURATION GUIDE

Running Status – Router Status

1. Router Status: Provides detail router status on Summary, System

Information, Connection status of the Internet port (Modem port), LAN

port, and Wireless Port (2.4G and 5G), and traffic statistics of each port.

• Summary: Information on L600N’s connection Status

• Internet: Whether Connected / Disconnected

• Wireless: shows 2.4GHz’s SSID name and 5GHz’s SSID name

• Client Devices: how many client devices connected to L600N

(both wired and wireless)

• Guest Network:

• Status: Whether Enabled / Disabled

• Guest Network enabled: how many Guest Network

has been enabled.

• System Info: Information on Hardware version , Firmware version,

model name, and system time.

L600N - Dual Band Wireless Router

CONFIGURATION GUIDE

Running Status – Router Status

• Internet Port:

• MAC Address: The physical address of the router, as seen from

the Internet.

• IP Address: The current Internet IP address. If assigned

dynamically, and no Internet connection exists, this will be

blank or 0.0.0.0.

• Internet Access Mode: Indicate DHCP, PPPoE or Fixed IP.

• IP Subnet Mask: The subnet mask associated with the

Internet IP address.

• Domain Name Server: Displays the address of the current DNS.

• LAN Port:

• MAC Address. The physical address of the router, as seen from

the LAN.

• IP Address. The LAN IP address of the router.

• IP Subnet Mask. The subnet mask associated with the LAN IP

address. DHCP. Indicates if the router is acting as a DHCP

server for devices on your LAN

L600N - Dual Band Wireless Router

CONFIGURATION GUIDE

Running Status – Router Status

• Wireless Port (2.4G) / Wireless Port (5G):

• Wireless Network Name (SSID): SSID name of the Signal

• Region: The location (country).

• Wireless Channel: The current channel in use.

• 802.11 Mode: Indicates the current mode (802.11b, 802.11g

and 802.11b/g/n).

• Wireless Radio: Indicates if the access point feature of the

router is enabled or not. If not enabled, the Wireless LED on

the front panel is off.

• Enable SSID Broadcast: Indicates if the router is broadcasting

its SSID.

• Enable Wireless Isolation: Indicates if wireless isolation is

enabled.

• Wi-Fi Protected Setup: Indicates if the router's wireless

settings are configured.

• Wireless Security Mode: Indicates the Wireless Security Mode

of your L600N’s current setting

+ 46 hidden pages