Rosewill DL-2090H User Manual
Wireless 7-buttons Rechargeable MouseWireless 7-buttons Rechargeable Mouse
RM1670W USER’S MANUAL
Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause serious
injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or
weakness in these areas, see a qualified health professional.
TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:
y Take frequent breaks, get up and walk around several times every hour.
y Vary your tasks throughout the day.
y Keep your shoulders relaxed with your elbows at your side. Position your
keyboard and mouse so you do not have to reach.
y Adjust your chair and keyboard so your upper
arms and wrists are straight.
y Avoid resting your wrists on sharp edges.
SYSTEM REQUIREMENT
y Mouse is compatible with standard Microsoft mode.
rd
button and wheel function require Win98/2000/ME/NT/XP.
y 3
th
y 4
& 5th button require Win2000/XP to function, or will require to install
additional driver as attached with this product.
th
y 6
th
& 7
button require installing additional driver as attached with this
product.
y If your computer’s operating system is Windows 98/ 98SE, please prepare
the Windows98 or 98SE compact disk for system’s request during the
installation of mouse.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and
future support for your product.
Getting Started
Congratulations on your purchase RM1670W, a 7 buttons wireless
re-chargeable LASER mouse. There are several important features in this
mouse:
LASER Mouse
LASER mouse, the last technology of mouse industry. The traditional red led
mouse can not work on some surface, especially smooth surface such as glass
and mirror. But, LASER mouse has overcome the “glass barrier”.
High Resolution
Normal resolution of a red LED mouse is 400 dpi or 800 dpi, but the hard
ware resolution of a LASER can be increased to 1,200 easily. The accuracy is
also much better than LED mouse.
Build-in Li-polymer battery
By well power management makes the long standby time. Charging in short
time can provide the power for all day using.
27MHz PR technique with Multi-channel
10 Channels with 256 ID codes for each channel to avoid the interruption. So,
the DL-2090C can work much stable than other wireless mice.
Charging cradle with build-in receiver
The USB receiver is a multi-functional product. It can be a mouse receiver,
mouse charger. All these are PNP function.
Package Contains
Your Radius Mouse package includes the following:
1. Wireless Mouse
2. Charging cradle with build-in receiver.
3. CD-ROM
4. User’s manual
Note：If any part is missing, please contact your dealer for a replacement
immediately.
BEFORE YOU BEGIN
y Keep this installation guide for future reference! It contains Important
Troubleshooting Information.
y Keep your old PS/2 mouse as a back-up device.
PRODUCT INSTALLATION
Step 1. Hardware Installation (Connecting the USB cradle receive)
1. Turn off your computer
2. Disconnect the current mouse
3. Plug the adapter into the receiver
4. Plug the USB connector (receiver) into USB port (computer).
5. Turn the computer on
a. USB is a PnP device; you can plug the device no matter the computer is
on or off. Of course, you can remove USB device in the same way.
b. If the device is HD or pen drive or any device which can store files, stop
the device than remove is the best way to protect the files.
c. The suggestion Is turn off the computer first.
Step 2. Waiting for software install
1. If your system is Windows ME/ 2000/ XP, windows will find a new device
and install standard driver automatically.
2. The standard software only support standard functions and will not
support special functions of the mouse.
Step 3. Driver install
1. Insert the driver CD into your CD-ROM player
2. It is a auto-run disk, following the installation guide and finish the process.
3. If you stop the auto-run function, please run the “setup.exe” file in the
disk.
Connect the mouse with the receiver
This RF wireless LASER mouse provides multi radio channels and
different ID codes to avoid interference with other users of wireless
mice. Before using the wireless mouse, you must ensure that the same
channel & ID are set for the mouse and its receiver.
Please follow the steps as below to set up:
1. Establish communication between the receiver and the mouse
(Select identification codes).
y Press and release the connect button on the receiver.
y Press and release the “connect” button on bottom of the
wireless mouse, within 6 seconds.
y After above “connect” procedure, the same ID is selected on
both of the receiver and the mouse.
y Please move the mouse to operate its cursor. If there is
problem, please do the connecting setting procedure again or
check the trouble shooting guide.
Loading...