Rosen Entertainment Systems DS-UN0910 User Manual

System Features
High resolution, touch-screen LCD display Navigation includes text-to-speech voice and visual turn-by-turn
directions, 5 Million+ Points-Of-Interest library, 3D route and building views
Play DVD movies, audio CDs or discs with MP3 music files AM-FM stereo tuner with 24 station presets (18 FM, 6 AM) Bluetooth Hands-Free interface with built-in microphone
TM
iPod XM Satellite Radio ready Supports the vehicle’s steering wheel controls USB & SD Card ports for multi-media playback (SD on some models) Back-Up Camera and/or sensor ready Dual Zone interface for optional rear seat displays
Universal II Quick Start Guide
Custom DVD Splash Screen capable
interface
In-Dash Multi-Media /
In-Dash Multi-Media /
Navigation System
Navigation System
DS -U N0 91 0
Notices
NOTICE OF INTENDED USE
Some features of Rosen Entertainment Systems are not intended for viewing by the driver when the vehicle is in motion,
such as movie playback. When using navigation, minimize the amount of time spent viewing the screen and use voice prompts as much as possible. Avoid prolonged use of the touch screen controls. Such use might distract the driver or
interfere with the driver’s safe operation of the vehicle, and thus result in serious injury or death. Such use might also
Rosen Entertainment Systems disclaims any liability for
any bodily injury or property damage that might result
violate state or local laws.
from any improper or unintended use.
Controls & Basic Operations
2
3
4
5
6
7
8
8
More detailed system operating instructions
1
are located in the Owner’s Manuals
- IMPORTANT -
1
9
10
11
12
13
Figure 1.
Control Button Details (as shown in Figure 1.)
CD/DVD/MP3 Disc Slot.
1
Press repeatedly to cycle through DVD or USB.
2
3
Enter/Exit Navigation Mode (navigation can only be exited by pressing this button).
4
Volume Up
5
Volume Down
Mute/Unmute
6
System reset (if required). Use a paper clip (or similar) to press.
7
Microphone for Bluetooth Hands-free
8
9
Eject button for DVD mode.
10
Press to turn system ON/OFF. Press again to set display to Night Mode. Press again to turn display OFF.
11
SD Card Slot (for navigation only).
12
Mini USB for external media device.
13
Light sensor used for auto-dimming.
2
Turn System On/Off
Vehicle ignition must be On or in ACC Mode to operate system.
Press the Power Button on the panel to turn the system ON/OFF (Figure 2).
Volume Adjustment
Press Vol+/- for volume adjustment
(Figure 2.).
Figure 2.
Main Menu
From any other screen, touch to enter Main Menu (Figure 3.) The Main Menu
includes TV, Bluetooth, iPodTM, Radio, XM, DVD, AV, Navigation and Setup.
Figure 3.
For detailed information of these functions, please refer to the “User’s Manual”.
TV Bluetooth iPodTM AM/FM Radio SAT Radio
DVD Auxiliary Input Navigation System Setup Return
3
Navigation
Before using the Rosen Navigation software, read this entire manual. Make sure that you are familiar with the system’s features and know how to operate the system.
Glance at the screen only when necessary and safe to do so. Let the computer voice guide you. If prolonged viewing is necessary, pull off the road to a safe location.
Introduction to Your Rosen Navigation
Rosen Navigation provides turn-by-turn visual and voice assistance to direct you to your selected destination. It quickly calculates step-by-step directions to any destination available on the in­cluded navigation map.
Rosen Navigation uses Global Positioning System (GPS) satellites, and a digital roadway map da­tabase to calculate and display travel directions. The system’s GPS antenna receives signals from a constellation of 24 satellites orbiting the earth and uses the strongest of signals, to determine your position to within meters.
_______________________________________________________
Before operating your Rosen Navigation system, please carefully read and follow the
For Complete Operating Instructions
Please refer to the Rosen Navigation User’s Manual to find complete instructions on the operation and many features of the Rosen Navigation System.
Initial Touch Screen Calibration
You may need to calibrate the touch screen when the system is first used. To do this, enter the Navigation Mode immediately after you turn the system on. Follow the Information screens as indicated.
instructions provided in the “Safety Information and Precautions”
located on Page 14 of this Quick Start Guide.
_______________________________________________________
4
Loading...
+ 11 hidden pages