The RosemountTM 499ACL-03 sensor is designed to measure monochloramine without the need for a sample conditioning system.
These amperometric sensors are ideal for use in drinking water and wastewater applications.
Measure monochloramine without having to deal with
messy reagents or expensive sample conditioning
systems.
Integral Pt-100 RTD allows for automatic temperature
compensation.
Operates in samples up to 50 °C (122 °F).
Measures 0 to 15 ppm monochloramine.
Ease of Maintenance and Installation
1 in. MNPT process connections suitable for mounting in a
low flow cell installed in a sidestream sample or directly in
a chlorine contact basin.
Replacing the membrane and electrolyte solution is fast
and easy and requires no special tools or fixtures.
Variopol (VP6) cable connection option, for quick cable-
to-sensor release, eliminates cable twisting.
Contents
Ordering Information ..................................................................................................................................................................... 3
Rosemount 499ACL-03 monochloramine sensors
are available with either a 25 ft integral cable or a
Variopol (VP6) quick disconnect connection for use with
VP6 interconnecting cables (sold separately). Three
replacement membrane assemblies, three O-rings, and a
4 oz (125 mL) bottle of electrolyte solution are provided
with each sensor.
Table 1. Rosemount 499ACL-03 Monochloramine ordering information
ModelSensor Type
499ACLChlorine Sensor
Sensor Type
03Monochloramine
Transmitter Compatibility
54For use with Rosemount 1056, 56, 1066, and 5081 transmitters
Wetted partsNoryl1, Viton2, silicone, wood, and Zitex3 (PFTE)
AccuracyAccuracy depends on the accuracy of the laboratory method used to calibrate the sensor.
CathodeGold mesh
Linearity2% (typ.)
pH rangeResponse is practically independent of pH between pH 7.0 and 10.0. Sensor current at pH 10.0 is within
InterferencesFree chlorine and other oxidizing agents
Sample conductivity>10 µS/cm at 25 °C (77 °F)
Response time<30 sec to 90% of final reading at 25 °C (77 °F)
Drift<2% of reading per week
Back pressure0 psig (101 kPa abs). Sample must drain to atmosphere.
Temperature0 to 50 °C (32 to 122 °F)
Process connection1 in. MNPT
Electrolyte volume25 mL (approx.)
Electrolyte life3 months (approx.)
Cable length (standard integral cable)25 ft (7.6 m)
Cable length (maximum)300 ft (91 m)
Weight/shipping weight1 lb / 3 lb (0.5 kg / 1.5 kg)
Sample flow
Low flow cell1 to 4 gal/hr (4 to 15 L/hr)
Open channelMinimum 0.2 ft/sec (0.06 m/sec)
5% of sensor current at pH 7.0.
(1) Noryl is a registered trademark of General Electric.
(2) Viton is a registered trademark of E.I. duPont de Nemours & Co.
(3) Zitex is a registered trademark of Performance Plastic Corp.
Table 3. Low flow cell specifications
PN 24091-01 contains a bubble sweeping nozzle to keep bubbles from accumulating against the membrane.
Wetted partsPolycarbonate, polyester, 316 stainless steel, and silicone
Process connection1/4 in. OD tubing compression fitting or 1/4 in. FNPT
Maximum inlet pressure90 psig (722 kPa abs). Sample must drain to open atmosphere.
Maximum temperature70 °C (158 °F)
Weight/shipping weight1 lb / 3 lb (0.5 kg / 1.5 kg)
Note: The temperature and pressure specifications of the flow cell exceed the specifications for the sensor.
4
www.Emerson.com/RosemountLiquidAnalysis
Page 5
July 2017
Table 4. Valved rotameter specifications
PN 9390004 for use with low flow cell PN 24091-01
Wetted partsAcrylic, 316 stainless steel, Viton
Process connection1/4 in. NFPT (316 stainless steel)
Maximum pressure100 psig (858 kPa abs)
Maximum temperature65 °C (150 °F)
Dimensional Drawings
Figure 1. Standard sensor with integral cableFigure 2. Sensor with Variopol connector
The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount and
the Rosemount logotype are registered trademarks of Rosemount Inc. All other marks are the
property of their respective owners.
The contents of this publication are presented for information purposes only, and while effort
has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, expressed or implied, regarding the products or services described herein or their
use or applicability. All sales are governed by our terms and conditions, which are available on
request. We reserve the right to modify or improve the designs or specications of our products
at any time without notice.
Middle East & Asia
Emerson Automation Solutions
Emerson FZE
Jebel Ali Free Zone
Dubai, UAE
P.O. Box 17033
T + 971 4 811 8100
F + 971 4 886 5465
Liquid.CSC@Emerson.com
Analyticexpert.com
Facebook.com/Rosemount
Asia Pacific
Emerson Automation Solutions
1 Pandan Crescent
Singapore 128461
Singapore
T + 65 777 8211
F + 65 777 0947
Liquid.CSC@Emerson.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.