Quick Start Guide
00825-0100-4106, Rev 02
August 2020
Rosemount™ G1 Welding Mandrel
1 About this guide
This guide provides instructions for mounting the welding mandrel
(part number FB-6041).
1.1 Safety instructions
Follow these guidelines to ensure safe use and extend the life of the
product.
CAUTION
• Read this document before using the product and keep it during
the entire service life.
• The product must be suitable for the corresponding applications
and environmental conditions without any restrictions.
• Only use the product for its intended purpose.
• If the operating instructions or the technical data are not adhered
to, personal injury and/or damage to property might occur.
• The manufacturer assumes no liability or warranty for any
consequences caused by tampering with the product or incorrect
use by the operator.
• Installation, electrical connection, set-up, operation and
maintenance of the product must be carried out by qualified
personnel.
2
2 Mount the welding mandrel
The welding mandrel absorbs heat and can prevent warping during
installation of the weld-in adapter.
Prerequisites
CAUTION
While welding, the weld-in adapter and mandrel can get extremely
hot. To prevent burns, allow the components to cool before
disassembling the weld-in adapter and mandrel assembly.
Procedure
1. Hand-tighten the weld-in adapter.
2. Insert the bolt through mandrel opening.
3
Loading...