Rosemount Quick Start Guide: Rosemount™ 5708 3D Solids Scanner Manhole Mounting Tool Kit Manuals & Guides
Quick Start Guide
00825-0200-4570, Rev AA
Rosemount™ 5708 3D Solids Scanner
Manhole Mounting Tool Kit
June 2017
Quick Start Guide
June 2017
1.0 About this guide
This guide provides instructions for installing the Rosemount 5708 3D Solids
Scanner in small vessel connections using the manhole mounting tool kit. It
does not provide instructions for mounting the scanner head, electrical
installation, or configuration.
Refer to the Rosemount 5708 Quick Start Guide
Reference Manual for more instructions. The manual and this guide are also
available electronically on Emerson.com/Rosemount.
Authorized personnel
All operations described in this document must be carried out by authorized, trained personnel only.
For safety and warranty reasons, any internal work on the devices must be carried out by
manufacturer-authorized personnel only.
Warnings about misuse
Inappropriate or incorrect use of the device may result in hazards and application-specific malfunctioning,
such as vessels overfill or damage to system components through incorrect mounting or adjustments.
If the device is used in a manner not specified in this document, the protection provided by the device will
be impaired.
General safety instructions
Consider local and national electrical codes and all common safety regulations and accident prevention
rules during installation.
Substitution of components may impair intrinsic safety.
For preventing ignition of flammable or combustible atmospheres, read, understand and adhere to the
manufacturer’s live maintenance procedures.
and Rosemount 5708
Contents
Install the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Rotate the antenna toward vessel center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
2
June 2017
A
B
C
1x 3x 1x
4.10 (104)
Ø 1.73 (44)
1.1 Manhole mounting tool kit
Figure 1. Manhole Mounting Tool Kit (P/N 05708-3023-0001)
A. Installation adapter
B. Set screw
C. 2 mm hex key
Dimensions are in inches (millimeters).
Quick Start Guide
1.2 Required equipment
Standard tools (e.g. screwdriver, pliers)
60 mm wrench
Wrench to secure the mounting plate bolts
2 mm hex key
Two ropes of appropriate type and length (see page 6)
3
Quick Start Guide
60 mm
2.0 Install the antenna
Step 1: Verify the O-rings are in place
June 2017
Step 2: Remove the nut from the neck tube
4
Loading...