Rosemount Quick Start Guide: Rosemount™ 214A Temperature Sensor Cut-to-Fit Instructions Manuals & Guides
Quick Start Guide
00825-0500-2654, Rev AA
May 2017
Rosemount™ 214A Temperature Sensor
Cut-to-Fit Instructions
Quick Start Guide
May 2017
NOTICE
This guide provides basic guidelines for Rosemount 214A Sensor models.
If the sensor was ordered assembled to a temperature thermowell or transmitter, see the appropriate product
literature for information on configuration and hazardous locations certifications.
Explosions could result in death or serious injury.
Installation of this sensor in an explosive environment must be in accordance with the appropriate local,
national, and international standards, codes, and practices.
Conduit/cable entries
Unless marked, the conduit/cable entries in the transmitter housing use a
marked “M20” are M20 x 1.5 thread form. On devices with multiple conduit entries, all conduit entries will
have the same thread form.
When installing in a hazardous location, use only appropriately listed or Ex certified flameproof/dust plugs,
adapters, or glands in cable/conduit entries.
Only use plugs, adapters, glands, or conduit with a compatible thread form when closing these entries.
1
/2–14 NPT thread form. Entries
Contents
Cut-to-fit instructions . . . . . . . . . . . . . . . . . . . . . 3
2
Loading...