Reference Manual
00809-0100-4549, Rev AA
December 2019
Net Safety™ Universal Duct Mount Assembly
Kit
UDM-003
2
Reference Manual Contents
00809-0100-4549 December 2019
Contents
Chapter 1 Introduction.................................................................................................................. 5
Chapter 2 Mounting.......................................................................................................................7
2.1 Fit Net Safety UDM-003 to duct........................................................................................................ 7
2.2 Insertion distance.............................................................................................................................8
Chapter 3 Specifications.................................................................................................................9
Chapter 4 Views and dimensions..................................................................................................11
Net Safety Universal Duct Mount iii
Contents Reference Manual
December 2019 00809-0100-4549
iv Emerson.com/Rosemount
Reference Manual Introduction
00809-0100-4549 December 2019
1 Introduction
The Net Safety UDM-003 (Universal Duct Mount) is Net Safety's latest design for allowing
sensors to monitor ducts. With its angular design and flexibility, it firmly supports a variety
of Net Safety's sensors with multipurpose junction boxes to ducts.
Mount the Net Safety UDM-003 with the following sensors:
• Net Safety Millennium II Series sensors
• Net Safety Millennium Premium ST Series sensors
• Gas shield sensors
The instructions in this Reference Manual will guide you in setting up and mounting the
Net Safety UDM-003 with a sensor and multipurpose junction box to a duct. In order to
ensure proper and safe mounting, follow the instructions given and ensure that all screws,
nuts, and bolts are tightly fitted. When calibrating, refer to the specific Reference Manual
as required. Emerson recommends using a 2.5 (or greater) liters per minute regulator
when calibrating.
WARNING
Never install the Net Safety UDM-003 at the bottom (underside) of a duct.
Net Safety Universal Duct Mount 5
Loading...