Rosemount Manual: CAT 100, CAT 200, BINOS 100 F Gas Analyzers Touch Panel Hints-200112 | Rosemount Manuals & Guides

Touch Panel Operation Manual

ETC00865
12/2001

Touch Panel

Hints on Operating the Touch Panel of CAT 100, CAT 200

and BINOS 100 F Gas Analyzers

http://www.processanalytic.com

Touch Panel

1-1 OVERVIEW

Touch Panel Operation Manual

ETC00865

12/2001

Introduction

Analyzers intended either to be used in
hazardous area or for outdoor usage are
provided with a Touch Panel. This special
version ensures ingress protection (IP) and
resistance against mechanical shocks.

1-2 TOUCH PANEL ELEMENTS

Whereas standard front panels are using
keys for operating the analyzer the Touch
Panel uses contactless Infra Red (IR)
technology instead. This results in a
slightly different design:

On account of its design it requires some
special measures to operate the
corresponding analyzer in a safe manner,
so read the following instructions carefully!

Each standard panel key is replaced by
two drill holes: One for IR light outlet and
another for entry, as it is shown using the
BINOS 100 F Touch Panel for instance.

IR outlet

1-3 ACCESSORIES

To operate the Touch Panel a special tool
(actuator) is required. The following picture

IR entry

shows this tool as it should be provided
together with your analyzer. If it is missing
please contact your local sales office.

Fisher-Rosemount MFG GmbH & Co. OHG A Division of Emerson Process Management1 - 2