Rosemount Manual: BINOS 100 Series Analyzers including OXYNOS 100, HYDROS 100 and CAT 100-1st Ed. | Rosemount Manuals & Guides

Instruction Sheet

HAS1xE-KA-SW5
05/2005

Instruction Sheet
BINOS® 100 Series Gas Analyzers

BINOS® 100, BINOS® 100 M,
BINOS
OXYNOS

st

1

Edition 05/2005

®

100 2M, BINOS® 100 F,

®

100, HYDROS® 100 & CAT 100

www.EmersonProcess.com

BINOS® 100 Series Instruction Sheet

HAS1XE-KA-SW5

05/2005

ESSENTIAL INSTRUCTIONS

READ THIS P AGE BEFORE PROCEEDING!

Emerson Process Management (Rosemount Analytical) designs, manufactures and test s
its products to meet many national and international standards. Because these instruments
are sophisticated technical products, you MUST properly install, use, and maintain
them to ensure they continue to operate within their normal specifications. The following
instructions MUST be adhered to and integrated into your safety program when installing,
using and maintaining Emerson Process Management (Rosemount Analytical) products.
Failure to follow the proper instructions may cause any one of the following situations to
occur: Loss of life; personal injury; property damage; damage to this instrument; and warranty
invalidation.

• Read all instructions prior to installing, operating, and servicing the product.

• If you do not understand any of the instructions, contact your Emerson Process

Management (Rosemount Analytical) representative for clarification.

• Follow all warnings, cautions, and instructions marked on and supplied with the product.

• Inform and educate your personnel in the proper installation, operation, and

maintenance of the product.

• Install your equipment as specified in the Installation Instructions of the appropriate

Instruction Manual and per applicable local and national codes. Connect all products

to the proper electrical and pressure sources.

• T o ensure proper performance, use qualified personnel to install, operate, update, program,
and maintain the product.

• When replacement parts are required, ensure that qualified people use replacement parts
specified by Emerson Process Management (Rosemount Analytical). Unauthorized parts
and procedures can affect the product’s performance, place the safe operation of your
process at risk, and VOID YOUR W ARRANTY. Look-alike substitutions may result in fire,
electrical hazards, or improper operation.

• Ensure that all equipment doors are closed and protective covers are in place, except
when maintenance is being performed by qualified persons, to prevent electrical
shock and personal injury.

The information contained in this document is subject to change without notice. Misprints
reserved.

1st Edition 05/2005
© 2005 by Emerson Process Management

Emerson Process Management
GmbH & Co. OHG

Industriestrasse 1
D-63594 Hasselroth
Germany
T [phone]
F [phone]
Internet: www.EmersonProcess.com