Rosemount Information Bulletin: GC Software Pay Attention to the Font Colors in the Component Data Table! | Rosemount Manuals & Guides

Information Bulletin

February 1, 2011 MON2000, MON2000 PLUS, MON 20/20

Pay Attention to the Font Colors in the Component Data Table!

The font color of the standard data (Gross
Dry BTU, Reid Vapor, Mole Weight, etc.)
listed in the Component Data Table (CDT) is
significant and can be used to learn, at a
glance, whether or not a component's
values were modified.

Note: All data displayed in the CDT is

considered 'standard' except for the
following: Usr/Std, Det #, Ret Time, Resp
factor, Calib Type, Calib Conc, Unit, Anly
Meth, RT Secs Dev, RT Upd Meth, and
Resp Fact %.

If a component's standard data is displayed
in red, that means its data is standard and is
taken from the second edition of the Orifice

Metering of Natural Gas and Other Related
Hydrocarbon Fluids and the Compressibility
Factors of Natural Gas and Other Related
Hydrocarbon Gases.

If a component's standard data is displayed
in black that means its data was changed.

Note: Another way of determining whether a

component's standard data was changed is
to check the Usr/Std column. Usr means
one or more of the component's values was
changed; Std means all of the component's
values are unchanged.