Rosemount 5408 and 5408:SIS Level Transmitters Software Download and Drivers Quick Start Guide

Quick Start Guide

00825-1100-4408, Rev AA

November 2019

Rosemount™ 5408 and 5408:SIS Level
Transmitters

Software Download and Drivers

Quick Start Guide November 2019

1 Configuration software

This Quick Start Guide provides information on where to download the
correct software and drivers needed in order to configure the device.

For more in-depth information, visit Emerson.com/Rosemount to download
the Rosemount 5408 and 5408:SIS with HART® Reference Manual or the
Rosemount 5408 with FOUNDATION™ Fieldbus Reference Manual.

1.1 FDI compliant hosts

Rosemount Radar Master Plus is the recommended tool for configuration.
The Instrument Inspector™ Application or any FDI compliant host is needed
to run Rosemount Radar Master Plus.

Instrument Inspector is available at Emerson.com/InstrumentInspector. The
installation typically includes the Rosemount 5408 FDI Package.

Note

If the Can’t initialize Radar Master error message occurs, then
the software revision on your device requires an update of the Rosemount

Radar Master Plus FDI Package.

1.1.1 Download the latest FDI Package

To manually add/update the Rosemount Radar Master Plus FDI Package:

Procedure

1.

Download the latest FDI Package at

Emerson.com/RosemountRadarMasterPlus

2. Unzip/extract the FDI Package.

3. Add the FDI Package to the host system.

.

1.1.2 Add the FDI Package to Instrument Inspector

Procedure

1. Start

2. From the menu bar, select

3. Browse to the downloaded FDI Package and select Open.

2 Rosemount 5408 and 5408:SIS Level Transmitters

Instrument Inspector.

, and then select Add Device Package.