Rose electronics RCP-12RS, RCP-4RS, RCP-16RS, RCP-8RS, RM-UL19 Specifications

Remote Control Panel

Features and Benefits

J Simple push button operation
J Extended distance capabilities with standard RJ11

data cable

J Available in 4, 8, 12, and 16 switch models that match

the number of CPU ports on your KVM switch

J Plugs into the RS232 port of a Rose KVM switch
J Has 1-DB9M, RS232 communication port
J Rack mount kits available for mounting in a 19”, 23”,

or 24” rack

J No set-up or configuration required, connect the RJ11

cable, the power adapter and it is ready to use

J LEDs in the center of each select button indicates

which CPU port is active

J Made in USA

Remote Control Panel – RCP

Remotely switch a KVM port to any CPU port
Compatible with Rose Electronics UltraView,

ServeView, and MultiVideo products
Connects directly to the RS232 port of a KVM switch

using a single RJ11 Data cable

The Remote Control Panel™ Advantage. .

The Remote Control Panel provides quick, easy, push­button switching to 4, 8, 12, or 16 computers.

When you push button 4 on the Remote Control Panel,
CPU port 4 on the KVM switch is instantly switched to
the KVM station.

The Remote Control Panel is ideal for system
applications where remotely switching different
computers to a common keyboard, monitor, and mouse
is needed.

Video switching applications, presentations, training
sessions, and many other applications are made easy
by using the push-button features of the Remote
Control Panel.

Connect to a CPU with

the push of a button

WWW.ROSE.COM

Typical Application

Instantly switch the KVM station to any CPU

with the press of a button

Models The Remote Control Panel is available in four

different models:
16 channel – Connects to 16 computers

12 channel – Connects to 12 computers
8 channel – Connects to 8 computers
4 channel – Connects to 4 computers

Cables A serial adapter cable is used to connect the

Remote Control Panel to the RS232 port on a
compatible KVM switch. The DB9M to RJ11 cable
connects from the DB9M connector on the Remote
Control Panel to the RS232 port on the KVM switch.
Extended distance cables are offered for distances
greater than 5 feet from the Remote Control Panel.

Installation The Remote Control Panel is easy to

install. You simply connect a cable from your KVM
switch to the Remote Control Panel, connect the power
adapter and it is ready to use. No setup or configuration
is needed.

Operation Operating the Remote Control Panel is as

easy as pushing a button. If you want the KVM station to
switch to CPU port 5, just push button #5. Immediately
the KVM station will switch to CPU port #5 and that
computer’s video will display.

Part numbers

Model
RCP-16RS 16 switch model

RCP-12RS 12 switch model
RCP-8RS 8 switch model
RCP-4RS 4 switch model
ACC-ATRX Serial adapter, RJ11 to DB9F
CAB-04RJnnn RJ11 cable
(nnn = length in feet)
RM-UL19 19” Rack mount kit
RM-UL23 23” Rack mount kit
RM-UL24 24” Rack mount kit

Specifications

Width Depth Height Weight

Dimensions 13.2 4.5 1.75 in 4lbs

33.5 11.4 4.45 cm 1.8kg
Connectors RS232 - DB9M

Power - DIN5 Indicators
Indicators CPU port selection LED
Chassis Electro galvanized steel,

black powder coated
Temp 0° – 45°C / 32°F – 113°F

Humidity 5% – 80% non-condensing RH
Approvals CE

 Phone: [phone]  E-mail: [e-mail] 

10707 Stancliff Rd. Houston, TX 77099

Rose Electronics – Europe: [phone] Rose Electronics – Asia: [phone]

DS-RCP 1.9  Copyright 2004 Rose Electronics. All rights reserved

Rearview of (All models)

WWW.ROSE.COM