Rose electronic CLK-4U2FM-500M, CLK-4U2FS-10KM User Manual

CrystalLink USB 2.0 Fiber

INSTALLATION AND

USB Fiber Extender

OPERATIONS

MANUAL

Part Number CLK-4U2FM-500M

CLK-4U2FS-10KM

10707 Stancliff Road Phone: [phone]
Houston, Texas 77099 WWW.ROSE.COM

LIMITED WARRANTY

Rose Electronics® warrants the CrystalLink™ USB 2.0 Fiber extender to be in good working order for
one year f rom the date of purchase from Rose Electronics or an authorized dealer. Should this
product fail to be in good working order at any time during this one-year warranty period, Rose
Electronics will, at its option, repair or replace the Unit as set forth below. Repair parts and
replacement units will be either reconditioned or new. All replaced parts become the property of Rose
Electr onics. This limited warranty does not include service to re pair damage to the Unit resulting fr om
accident, disaster, abuse, or unauthorized modification of the Unit, including static discharge and
power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period
to Rose Electronics or an authorized repair center providing a proof of purchase date. If this Unit is
delivered by mail, y ou agree to ins ure the Unit or assume the risk of loss or damage in tr ansit, to
prepay shipping charges to the warranty service location, and to use the original ship ping con tainer or
its equivalent. You must call for a return authorization number first. Under no circumstances will a unit
be accepted without a return authorization number. Contact an authorized repair center or Rose
Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR P URPOS E, ARE
LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL
ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST
PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE
ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been test ed and found t o c omply with the limits fo r a C lass A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may ca use harmful interfere nce to radio
communications. O peration of t his equipme nt in a residential area i s likely to ca use harmful
interference in which case the user will be required to correct the interference at his own expense.

IBM, AT, and PS/2 are trademark s of International Business Machi nes Corp. Microsoft and Microsoft
Windows are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this
manual are acknowledged to be the property of the trademark owner.

Copyright Rose Electronics 2010. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any
means, electronic or mechanical, including photocopying and recording, without the prior written permission
of Rose Electronics.

Rose Electronics Part # MAN-CRL-USB2-F
Printed In the United States of America - Revision

FCC/IC STATEMENTS, EU DECLARATION O F CONF ORMITY

EN55024 1998+A2:2003

FEDERAL COMMUNICATIONS COMMISSION

AND INDUSTRY CANADA

RADIO-FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses and can radiate radio frequency energy
and if not installed and used properly, that is in strict accordance with the
manufacturer’s instructions may cause interference to radio communication.
It has been tested and found to comply with the limits for a Class B digital
device in accordance with the specifications of Part 15 of FCC rules, which
are designed to provide reasonable protection against such interference
when the equipment is operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference, in which
case the user at his own expense will be required to take whatever
measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class B limits for radio noise
emission from digital apparatus set out in the Radio Interference Regulation
of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe B
prescrites dans le Règlement sur le brouillage radioélectrique publié par
Industrie Canada.

EUROPEAN UNION DECLARATION OF CO NFORMITY

The Declaration of Conformity is based upon
compliance of the product with the following
harmonized standards:
EN55022+A1 2007 Class B
EN61000-3-2 2006
EN61000-3-3 2003

IC Statement

This Class B digital apparatus complies with Canadian ICES-003

TABLE of CONTENTS

Contents Page #

Disclaimer ...................................................................................................... 1

System introduction ....................................................................................... 1

Features ......................................................................................................... 2

Package contents .......................................................................................... 2

Rose Electronics web site.............................................................................. 2

About this manual .......................................................................................... 2

CrystalLink USB 2.0 Fiber model .................................................................. 3

Transmitter ................................................................................................. 3

Receiver ..................................................................................................... 4

Cables ........................................................................................................ 4

Verifying the installation ............................................................................. 5

Operating Instructions .................................................................................... 6

Troubleshooting Guide .................................................................................. 7

Safety ............................................................................................................. 8

Service Information ...................................................................................... 10

Maintenance and Repair .......................................................................... 10

Technical Support .................................................................................... 10

Figures Page #

Figure 1. Installation ...................................................................................... 5

Appendices Page #

Appendix A. General Specifications ........................................................... 11

Appendix B. Part Numbers and Cables ...................................................... 11

INTRODUCTION

Disclaimer

While every precaution has been taken in the preparation of this manual, the
manufacturer assumes no responsibility for errors or omissions. Neither
does the manufacturer assume any liability for damages resulting from the
use of the information contained herein. The manufacturer reserves the
right to change the specifications, functions, or circuitry of the product
without notice.

The manufacturer cannot accept liability for damages due to misuse of the
product or other circumstances outside the manufacturer’s control. The
manufacturer will not be responsible for any loss, damage, or injury arising
directly or indirectly from the use of this product.

System introduction

Thank you for choosing the Rose Electronics CrystalLink USB 2.0 Fiber
extender. The CrystalLink USB 2.0 Fiber extender is the result of Rose
Electronics commitment to providing state-of-the-art solutions for today’s
demanding workplace. The CrystalLink USB 2.0 Fiber has proven to be a
valuable investment for any business, big or small, that has a need to
access and extend their USB 1.1 or 2.0 peripherals from a remote location.
This location can be up to 1640 feet (500m-Mulitmode model) or 6 miles (10
km-Singlemode model).

The receiver unit’s USB port connects to your USB peripheral. The number
of peripherals can be increased by using a standard USB hub.

The USB peripherals can be USB 1.1 devices (low-speed or full-speed) or
USB 2.0 high-speed devices operating up to 480 Mb/s. The receiver unit
can supply up to 500 ma for driving high-power USB devices.

Plug-and-play installation makes installing the transmitter and receiver
simple and easy. Connect the transmitter to the computers USB port,
connect the USB port on the receiver to your USB device, connect the
transmitter to the receiver with Singlemode or Multimode fiber cable
(depending on your model), connect the provided power adapter to the
transmitter and receiver and power on the system.

The USB devices will function normally as if they are directly connected to
your computer’s USB port even though they are up to 6 miles away.

NOTE: The provided 5V, 3.0A power adapter connects to the receiver.
An optional 5V, 0.5A power adapter connects to the transmitter unit
if the host PCs USB port does not supply the needed power.

Installation and Operations Manual

1