Rose displays FLOOR WINDO User Manual

Floor Windo
®
Parts
"Your Poster"
Instruction Sheet
Rubber Rim
Rubber Rim
Clear window
“Your Poster”
Clear Window
Assembly Instructions
Note:
• Use on dust-free surface only.
• Use in dry conditions only.
Step 1
Place poster into rubber rim, keeping rough side of window on top. Fig. 1
Step 2
Start by bending all corners of the window into the rubber rim. Keep Floor Windo
Step 3
Keep both thumbs on window. Bend rubber rim down to flex rim over window. Fig. 3
®
flat. Fig. 2
Adhesive
Velcro Strips
Clear Window
"Your Poster"
Rubber Rim
Figure 1 Figure 2
Your Graphic Here!
Flex to pop
Rim over
Window
Corners
in first
Step 4
Make sure all sides are closed securely. Fig. 4
Step 5
If using on carpet, add Velcro Strips provided to opposite ends of short sides to hold Floor Windo
Floor Windo is a registered trademark of Floor Windo International.
Incept-10.25.00
®
more securely. Fig. 5
Figure 3
Figure 4
Figure 5
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Floor Windo
®
Parts
"Your Poster"
Clear Window
Assembly Instructions
Instruction Sheet
Rubber Rim
Rubber Rim
Clear window
“Your Poster”
Adhesive
Velcro Strips
Note:
• Use on dust-free surface only.
• Use in dry conditions only.
Step 1
Place poster into rubber rim, keeping rough side of window on top. Fig. 1
Step 2
Start by bending all corners of the window into the rubber rim. Keep Floor Windo
®
flat. Fig. 2
Step 3
Keep both thumbs on window. Bend rubber rim down to flex rim over window. Fig. 3
Step 4
Make sure all sides are closed securely. Fig. 4
Step 5
If using on carpet, add Velcro Strips provided to opposite ends of short sides to hold Floor Windo
®
more securely. Fig. 5
Clear Window
"Your Poster"
Rubber Rim
Figure 1 Figure 2
Your Graphic Here!
Flex to pop
Rim over
Window
Figure 3
Corners
in first
Figure 4
Floor Windo is a registered trademark of Floor Windo International.
Incept-10.25.00
Figure 5
Loading...