Rose displays ECONOSTAND WITH ANOQUICK User Manual
EconoStand™
Parts
Instruction Sheet
End Caps
06-5525
AnoQuick
12A300
Instructions For Assembly
Step 1
Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole).
Step 2
Screw pole onto baseplate. Tighten
securely.
Step 3
Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.
EconoStand
components
Pole
Bottom
Holder Bracket
1 2
3 4
Base Plate
Top
Thumb
Screw
Top
Holder Bracket
2a
Step 4
Prepare edges of graphic. Place the
graphic on tablettop with one edge at
the table edge. Using the AnoQuick
Holder run it across the graphic edge,
crushing it slightly. Fig. 4 Push the
5 6
holder on the graphic.
Step 5
Slide AnoQuick Holder onto brackets.
Install endcaps after assembly to
brackets.
Step 6
Adjust height of stand as necessary.
The AnoQuickTM and EconostandTM are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for injury,
loss or damage resulting from the use of these products.
Part#02INSEcono/AnoQuick
Revised-9.10.02
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
EconoStand™
Parts
Instruction Sheet
EconoStand
components
Pole
Base Plate
Top
Thumb
Screw
End Caps
06-5525
AnoQuick
12A300
Instructions For Assembly
Step 1
Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole).
Step 2
Screw pole onto baseplate. Tighten
securely.
Step 3
Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.
Step 4
Prepare edges of graphic. Place the
graphic on tablettop with one edge at
the table edge. Using the AnoQuick
Holder run it across the graphic edge,
crushing it slightly. Fig. 4 Push the
holder on the graphic.
Bottom
Holder Bracket
1 2
3 4
5 6
Top
Holder Bracket
2a
Step 5
Slide AnoQuick Holder onto brackets.
Install endcaps after assembly to
brackets.
Step 6
Adjust height of stand as necessary.
The AnoQuick and EconoStand are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoQuick
Revised-9.10.02
Loading...