Rose displays ECONOSTAND WITH ANOMULTI User Manual
EconoStand
™
Parts
Instruction Sheet
End Caps
06-5525
AnoMulti
12AM300
Instructions For Assembly
Step 1
Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole).
Step 2
Screw pole onto baseplate. Tighten
securely.
Step 3
Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.
EconoStand
components
Pole
Bottom
Holder Bracket
1 2
3 4
Base Plate
Top
Thumb
Screw
Top
Holder Bracket
2a
Fig. 1
Step 4
Insert the poster into the Slim Holder
by either sliding the poster into the
holder or tapping the holder onto the
poster. . Fig. 1 Slide Slim Holder into
AnoMulti Holder. Fig.2
5 6
Step 5
Slide AnoMulti Holder onto brackets.
Install endcaps after assembly to
brackets.
Step 6
Adjust height of stand as necessary.
The Slim
Ltd. Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoMulti
Inception 9.10.02
AnoMulti and EconoStand are trademarks of Rose Displays,
,
Fig. 2
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
EconoStand
™
Parts
Instruction Sheet
End Cap
06-5525
AnoMulti
12AM300
Instructions For Assembly
Step 1
Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole).
Step 2
Screw pole onto baseplate. Tighten
securely.
Step 3
Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.
EconoStand
components
Pole
Bottom
Holder Bracket
1 2
3 4
Base Plate
Top
Thumb
Screw
Top
Holder Bracket
2a
Fig. 1
Step 4
Insert the poster into the Slim Holder
by either sliding the poster into the
holder or tapping the holder onto the
poster. . Fig. 1 Slide Slim Holder into
AnoMulti Holder. Fig.2
5 6
Step 5
Slide AnoMulti Holder onto brackets.
Install endcaps after assembly to
brackets.
Step 6
Adjust height of stand as necessary.
The Slim, AnoMulti and EconoStand are trademarks of Rose Displays,
Ltd. Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoMulti
Inception 9.10.02
Fig. 2
Loading...