
EconoStand™ with AnoFrame™
Instruction Sheet
Parts
Finished look
Instructions for Assembly
Step 1
Assemble frame except for split rails.
Insert corner brackets into AnoFrame
sides. Fig. 1
Note: Assembly brackets
tension tabs face towards outside
of frames. Split rail side is made
up of 2 separate pieces.
Corner
brackets
1
AnoFrame rails
12AF100
Page 1
AnoFrame
split rails
Step 2
Insert corner brackets into split
rails and into rail opposite split
rail as shown in Fig. 2 . Assemble
frame following diagram steps
1 thru 3, sliding sides together
in the order shown.
The AnoFrame and EconoStand are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoFrame
Incept-9.10.02
2
* Assemble frame
except for split rails.
solid rail
1
solid rail
2
split rails
3
solid rail
(continued on other page)
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com

EconoStand™ with AnoFrame™
Instruction Sheet
Parts
Finished look
Instructions for Assembly
Step 3
Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole.
Step 4
Screw pole onto baseplate.
Tighten securly.
EconoStand
components
Pole
Bottom
Holder Bracket
3 4
Base
Plate
Page 2
Top
Thumb
Screw
Top
Holder Bracket
Step 5
5
Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.
Step 6
Slide top and bottom rails onto
holder brackets.
Step 7
Assemble split rails onto side ends
of solid rails, one inside and one
outside of each side of the AnoFrame.
Fig. 7 & 8
7 8
Step 8
Adjust height of stand as necessary.
The AnoFrame and EconoStand are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoFrame
Incept-9.10.02
6
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com