
EconoFrame™
Parts
Instruction Sheet
Corner
brackets
Instructions for Hanging
Step 1
Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
EconoFrame rails. Insert two corner
brackets into each end of the solid
side rail. Insert one corner bracket
into each end of each split side rail.
Fig. 1 & Fig. 2
Note: Tension tabs on corner
brackets face towards outside of
frame.
Step 2
Slide the Window Mounts
into the top rail of the EconoFrame
rail. Fig. 3
Step 3
Finish assembling frame following the
sequence in Fig. 4.
Step 4
Insert poster. Fig 5
EconoFrame
Rails 12EF-100
Figure 1
EconoFrame
Split Rails
Figure 3
split rails
Window Mounts
20-0038
solid rail
split rails
Figure 2
Note: For best performance when
first applied and occasionally
thereafter, press the middle of the
cup (on the cap) to “burp” extra
air out.
The EconoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSEconoFrameWindowMounts
Incept-12.04.02
Figure 4
Figure 5
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com

EconoFrame™
Parts
Instruction Sheet
Corner
brackets
Instructions for Hanging
Step 1
Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
EconnoFrame rails. Insert two corner
brackets into each end of the solid
side rail. Insert one corner bracket
into each end of each split side rail.
Fig. 1 & Fig. 2
Note: Tension tabs on corner
brackets face towards outside of
frame.
Step 2
Slide the Window Mounts
into the top rail of the EconoFrame
rail. Fig. 3
Step 3
Finish assembling frame following the
sequence in Fig. 4.
Step 4
Insert poster. Fig 5
EconoFrame
Rails 12EF-100
Figure 1
EconoFrame
Split Rails
Figure 3
split rails
Window Mounts
20-0038
solid rail
split rails
Figure 2
Note: For best performance when
first applied and occasionally
thereafter, press the middle of the
cup (on the cap) to “burp” extra
air out.
The EconoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSEconoFrameWindowMounts
Incept-12.04.02
Figure 4
Figure 5