EconoFrame
TM
Parts
Instruction Sheet
Corner
brackets
Instructions for Hanging
Instructions for Hanging
Step 1
Insert corner brackets into split
rails and into rail opposite split
rail. Split rail side is made up of
two separate pieces. Fig. 1
Note: Corner bracket tension
tabs must face toward inside
of frame.
Step 2
Squeeze sides of MultiClip
together. Fig. 2.
Step 3
Find top rail of frame and align
the bottom rail of the MultiClip
with the top channel of the top
rail. Slide MultiClip into rail.
Fig. 3 Repeat steps 2 & 3 for
second MultiClip.
EconoFrame rails
12EF100
Figure 2 Figure 3
solid rail w/
EconoFrame
split rails
Figure 1
MultiClips
1UP-0101
split rails
Step 4
Assemble frame following steps in.
Fig. 4 sliding sides together in the
order shown.
Step 5
Insert poster. Fig 5.
The EconoFrameā¢ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSEconoFrameMC
Incept-8.5.02
3
solid rail
Figure 4
split rails
4
Figure 5
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
EconoFrame
TM
Parts
Instruction Sheet
Corner
brackets
Instructions for Hanging
Instructions for Hanging
Step 1
Insert corner brackets into split
rails and into rail opposite split
rail. Split rail side is made up of
two separate pieces. Fig. 1
Note: Corner bracket tension
tabs must face toward inside
of frame.
Step 2
Squeeze sides of MultiClip
together. Fig. 2.
Step 3
Find top rail of frame and align
the bottom rail of the MultiClip
with the top channel of the top
rail. Slide MultiClip into rail.
Fig. 3 Repeat steps 2 & 3 for
second MultiClip.
EconoFrame rails
12EF100
Figure 2 Figure 3
solid rail w/
EconoFrame
split rails
Figure 1
MultiClips
1UP-0101
split rails
Step 4
Assemble frame following steps in.
Fig. 4 sliding sides together in the
order shown.
Step 5
Insert poster. Fig 5.
The EconoFrameā¢ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSEconoFrameMC
Incept-8.5.02
3
solid rail
Figure 4
split rails
4
Figure 5