ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND LOOP AND SAUCER, EconoFrame Instruction Sheet

EconoFrame

TM

Parts

Instruction Sheet

Cable Clips

06-5050

Instructions for Hanging

Instructions for Hanging

Corner

brackets

Step 1

Insert corner brackets into split
rails and into rail opposite split
rail. Split rail side is made up of
two separate pieces. Fig. 1

Note: Corner bracket tension
tabs must face toward inside
of frame.

Step 2

Place cable into inner channel of
CableClip. The cable should snap
into place. Fig. 2

Step 3

Align one end of the CableClip
with the top channel of the frame.
Then insert one round end, press
down on the other round end
and slide CableClip into rail.
Fig. 3 Repeat steps 2 & 3 for
second CableClip.

Step 4

Assemble frame following steps in.
Fig. 4 sliding sides together in the
order shown.

EconoFrame rails

12EF-100

EconoFrame

split rails

Figure 1

Figure 2 Figure 3

solid rail w/

split rails

3

solid rail

4

Figure 4

Loop & Saucer

16-0018SL

1

solid rail

Figure 5

2

split rails

Step 5

Insert poster. Fig 5.

The EconoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSEconoFCCLoop

Incept-11.13.02

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

EconoFrame

TM

Parts

Instruction Sheet

Cable Clips

06-5050

Instructions for Hanging

Instructions for Hanging

Corner

brackets

Step 1

Insert corner brackets into split
rails and into rail opposite split
rail. Split rail side is made up of
two separate pieces. Fig. 1

Note: Corner bracket tension
tabs must face toward inside
of frame.

Step 2

Place cable into inner channel of
CableClip. The cable should snap
into place. Fig. 2

Step 3

Align one end of the CableClip
with the top channel of the frame.
Then insert one round end, press
down on the other round end and
slide CableClip into rail. Fig. 3
Repeat steps 2 & 3 for
second CableClip.

Step 4

Assemble frame following steps in
Fig. 4 sliding sides together in the
order shown.

EconoFrame rails

12EF-100

Figure 2

solid rail w/

3

solid rail

4

Figure 4

EconoFrame

split rails

Figure 1

Figure 3

split rails

Loop & Saucer

16-0018SL

1

solid rail

split rails

Figure 5

2

Step 5

Insert poster. Fig 5.

The EconoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSEconoFCCLoop

Incept-11.13.02