Rose displays ANOSCREEN WITH BASE RAIL User Manual

AnoScreen™

Parts

Ano rails

Base Rails

Instruction Sheet

Ver tical Rails

Corner Brackets

with Flex Spine

Split Rails

Instructions For Assembly

Step 1

Insert corner brackets into ends of
bottom base rails, using thumb, as
shown in illustration. 2 brackets per
end of each rail. Fig. 1
Detail Fig. 1a- Corner bracket tension
tabs face toward outside of frame.

Step 2

Lay out parts as they will be configured
on the floor. (2, 3 or 4 panels)

Step 3

Assemble the vertical rail assemblies
onto the upward facing corner brackets
already inserted into the bottom base
rails. All 4 brackets can go into the
vertical rails at one time, or you can do
one side at a time.
Note: Make sure grommets are on the
top end of the vertical panels. Use the
two vertical rails without flex spine
connectors on the outside edges of the
outermost panels.

1 1a

2

2a

2 Panel

3 Panel

4 Panel

3

3

3

The AnoScreen™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part#02INSAnoScreenBaseRail

Incept-8.15.02

(continued on other side)

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoScreen™

Parts

Vario Base Corner Brackets Split Rails

Instruction Sheet

Vertical Rails

with Flex SpineAno rails

Instructions For Assembly

Step 1

Insert corner brackets into ends of
bottom rails, using thumb, as shown
in illustration. 2 brackets per end of
each rail. Fig. 1
Detail Fig. 1a- Corner bracket tension
tabs face toward outside of frame.

Step 2

Snap base Ano rail sections into the
Vario base section.

Start at one end and work the Vario
base onto the Ano rail.

Step 3

Lay out parts as they will be configured
on the floor. (2, 3 or 4 panels)

1 1a

2 2a

3

3

2a

The AnoScreen™ is a registered trademark of Rose Displays, Ltd. Neither
the manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part#02INSAnoScreenBaseRail

Incept-8.15.02

2 Panel

3 Panel

4 Panel

(continued on other side)