Rose displays ANOMULTI WITH WINDOW MOUNTS User Manual

AnoMulti™

Parts

Sign Mounting Systems for Windows

AnoMulti

12AM300

Instructions for Hanging

Instructions for Hanging

Step 1

Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1

Note: For thinner substrates, it may be neces­sary to staple the edge of the graphic before
inserting into Slim Holder.

Step 2

Slide Slim holder into AnoMulti holder. Fig. 2

Step 3

Slide the Window Suction Cups into the top rail
of the AnoMulti Holder. Fig. 3

Step 4

Push end caps into place. Fig. 4

Window Mounts

20-0038

End Caps

06-5525

Figure 1

Figure 2 Figure 3

Step 5

Suspend poster. Make sure glass and suction cups
are clean and free of dust and dirt.

Important note:

For best performance when first applied and
occasionally thereafter, press the middle of the
cup (on the cap) to “burp” extra air out.

The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiWindowMounts

Incept-9.12.02

Figure 4

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoMulti™

Parts

Sign Mounting Systems for Windows

AnoMulti

12AM300

Instructions for Hanging

Instructions for Hanging

Step 1

Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1

Note: For thinner substrates, it may be neces­sary to staple the edge of the graphic before
inserting into Slim Holder.

Step 2

Slide Slim holder into AnoMulti holder. Fig. 2

Step 3

Slide the Window Suction Cups into the top rail
of the AnoMulti Holder. Fig. 3

Step 4

Push end caps into place. Fig. 4

Window Mounts

20-0038

End Caps

06-5525

Figure 1

Figure 2 Figure 3

Step 5

Suspend poster. Make sure glass and suction cups
are clean and free of dust and dirt.

Important note:

For best performance when first applied and
occasionally thereafter, press the middle of the
cup (on the cap) to “burp” extra air out.

The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiWindowMounts

Incept-9.12.02

Figure 4