Rose displays ANOMULTI SQUARE WITH MULTICLIPS User Manual

AnoMulti™

Parts

Instruction Sheet

AnoMulti

12AM300SQ

Instructions for Hanging

Instructions for Hanging

Step 1

Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. Fig. 1

Note: For thinner substrates, it may be neces­sary to staple the edge of the graphic before
inserting into Slim Holder.

Step 2

Slide Slim holder into AnoMulti holder. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with
the top channel of the aluminum holder. Slide
MultiClip into rail. Fig. 4 Repeat steps 3 & 4
for second MultiClip.

MultiClips

1UP-0101

End Caps

06-5545

Figure 1

Figure 3 Figure 4

Figure 2

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoMulti holder,
End caps and MultiClips for future projects.

The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiSQMC

Incept-7.31.02

Figure 6Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoMulti™

Parts

Instruction Sheet

AnoMulti

12AM300R

Instructions for Hanging

Step 1

Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. Fig. 1

Note: For thinner substrates, it may be neces­sary to staple the edge of the graphic before
inserting into Slim Holder.

Step 2

Slide Slim holder into AnoMulti holder. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with
the top channel of the aluminum holder. Slide
MultiClip into rail. Fig. 4

MultiClip

1UP-0101

End Caps

06-5545

Figure 1

Figure 2

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoMulti holder,
End caps and MultiClips for future projects.

The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiSQMC

Incept-7.31.02

Figure 3 Figure 4

Figure 6Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]