Rose displays ANOMULTI SQUARE WITH CABLE AND SAUCER User Manual

AnoMulti™

Instruction Sheet

Parts

AnoMulti

12AM300SQ

Instructions For Hanging

Step 1

Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1

Note: For thinner substrates, it may be neces­sary to staple the edge of the graphic before
inserting into Slim Holder.

Step 2

Slide Slim Holder into the AnoQuick Holder.

Fig. 2

Cable and

Saucer

16-0018SS

End Caps

06-5525

Figure 1

Figure 2

Step 3

Insert saucer into end of top Ano rail. Fig. 3.

Note: It is easier to slide the saucer in the Ano rail
if you hold the cable as close to the saucer as
possible.

Step 4

Push end caps into place. Fig. 4

Step 5

Suspend poster.

Important note:

Please save and reuse the AnoMulti Holder,
End caps and Cable and Saucer for future projects.

The AnoMulti and SlimSqueeze are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMCableSaucer

Incept-8.23.02

Figure 3

Figure 4

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoMulti™

Instruction Sheet

Parts

AnoMulti

12AM300SQ

Instructions For Hanging

Step 1

Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1

Note: For thinner substrates, it may be neces­sary to staple the edge of the graphic before
inserting into Slim Holder.

Step 2

Slide Slim Holder into the AnoQuick Holder.

Fig. 2

Cable and

Saucer

16-0018SS

End Caps

06-5525

Figure 1

Figure 2

Step 3

Insert saucer into end of top Ano rail. Fig. 3.

Note: It is easier to slide the saucer in the Ano rail
if you hold the cable as close to the saucer as
possible.

Step 4

Push end caps into place. Fig. 4

Step 5

Suspend poster.

Important note:

Please save and reuse the AnoMulti Holder,
End caps and Cable and Saucer for future projects.

The AnoMulti and SlimSqueeze are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMCableSaucer

Incept-8.23.02

Figure 3

Figure 4

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]