Rose displays ANOGOTCHA STAND WITH TOPPER User Manual
AnoGotcha
These are all the parts required to assemble 1 AnoGotcha Stand.
Parts
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
Finished look.
Read this instruction sheet carefully before assembly. Separate
all parts and check quantities.
Make sure all parts are accounted for before discarding any
packaging materials.
If you experience any problems
with the assembly, please call
Rose Displays at
1-800-631-9707.
Topper Clips
06-6100
Topper Clip
™
Stand with Topper Clips
Instruction Sheet
AnoGotcha
Shell
12AT300
Important terms:
top AnoGotcha holder
vertical post
T-Gotcha
12GT100
9” round base
97-0302
vertical poles
97-0301
ball knobs &
threaded rods
97-0303
97-0304
shaped
end caps
97-0305
ball knobs
bottom AnoGotcha holder
9” round base
AnoGotcha is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any
sales agent may be held liable for injury, loss or damage resulting from the use of these products.
AnoGotcha
™
Stand
assembly continued
Step 1
• Locate four ball knobs and
two threaded rods.
• Screw one ball knob
onto one end of each
threaded rod.
Note:
Do not screw a ball
knob onto both ends
of threaded rods.
Step 2
• Screw the end of one
vertical pole onto the
threaded stud of each
9” round base.
• Repeat for both poles.
Screw ball knobs onto threaded rods.
Screw vertical poles onto 9” round bases.
Screw one ball knob on one end of
threaded rod and tighten.
You should have one ball knob on one end of each threaded rod.
vertical
pole
9” round
base
Screw one vertical pole onto each
9” round base.
AnoGotcha is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any
sales agent may be held liable for injury, loss or damage resulting from the use of these products.
Part #02INSAnoGotchaStandTopper
Tighten with hands.
You should have two matching vertical poles with bases.
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Loading...