Rose displays ANOGOTCHA ROUND WITH SLATWALL User Manual

AnoGotcha™
Parts
Instruction Sheet
AnoGotcha Shell
12AG400
Instructions for Hanging
Step 1
Insert T-Top Gotcha Holder into AnoGotcha Shell. Fig. 1
Step 2
Push end caps into place. Fig. 2
Step 3
Snap the AnoGotcha Holder completely open so that hinge is turned up as far as possible. Insert poster into holder until top of poster meets top of holder. To close snap the AnoGotcha Holder shut. Fig. 3 With large or curling graphics, it may be easier to insert graphic at one end and slide into holder from one end to another.
Step 4
Insert hangers into upper portion of slatwall. Hangers will rest on lower portion of slatwall. Fig. 4 Note: To ensure that the frame hangs level use two hangers placed an equal distance in from each side of the frame.
T-Top Gotcha
End Caps
06-5525
Figure 4
Slatwall Hangers
06-6068
Figure 2Figure 1
Figure 3
Step 5
Place the AnoGotcha on the hangers using the bottom channel of the top rail. Fig. 5
Important note:
Please save and reuse the AnoGotcha Holder, End Caps and sSlatwall Hangers for future projects.
AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoGotchaSlatwall
Incept-9.9.02
Figure 5
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
AnoGotcha™
Parts
Instruction Sheet
AnoGotcha Shell
12AG400
Instructions for Hanging
Step 1
Insert T-Top Gotcha Holder into AnoGotcha Shell. Fig. 1
Step 2
Push end caps into place. Fig. 2
Step 3
Snap the AnoGotcha Holder completely open so that hinge is turned up as far as possible. Insert poster into holder until top of poster meets top of holder. To close snap the AnoGotcha Holder shut. Fig. 3 With large or curling graphics, it may be easier to insert graphic at one end and slide into holder from one end to another.
Step 4
Insert hangers into upper portion of slatwall. Hangers will rest on lower portion of slatwall. Fig. 4 Note: To ensure that the frame hangs level use two hangers placed an equal distance in from each side of the frame.
T-Top Gotcha
End Caps
06-5525
Figure 4
Slatwall Hangers
06-6068
Figure 2Figure 1
Figure 3
Step 5
Place the AnoGotcha on the hangers using the bottom channel of the top rail. Fig. 5
Important note:
Please save and reuse the AnoGotcha Holder, End Caps and sSlatwall Hangers for future projects.
AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoGotchaSlatwall
Incept-9.9.02
Figure 5
Loading...