Rose displays ANOGOTCHA ROUND WITH CABLE AND SAUCER User Manual

AnoGotcha™

Parts

Instruction Sheet

2

AluGotcha Shell

12AG400SQ

Instructions for Hanging

Step 1

Insert T-Top Gotcha Holder into the
AnoGotcha Shell. Fig. 1

Step 2

Insert saucer into top rail of the holder.
Note: It is easiest to slide the saucer into the
holder if you hold the Loop as close to the
saucer as possible. Fig. 2

Step 3

Push end caps into place. Fig. 3

Step 4

Snap the AnoGotcha Holder completely open
so that hinge is turned up as far as possible.
Insert poster into holder until top of poster
meets top of holder. To close snap the
AnoGotcha Holder shut. Fig. 4

2 Cable and

2

T-Top Gotcha

Saucer

16-0018SS

Figure 1 Figure 2

Figure 3 Figure 4

4

End Caps

06-5545

Step 5

Suspend poster. Fig. 5

Important note:

Please save and reuse the AnoGotcha Holder,
End Caps, and Cable and Saucer for future
projects.

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose
Displays, Ltd. Neither the manufacturer nor any sales agent may be held
liable for injury, loss or damage resulting from the use
of these products.
Part #02INSIMAnoGCableandSaucer

Incept-8.23.02

Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoGotcha™

Parts

Instruction Sheet

2

AluGotcha Shell

12AG400SQ

Instructions for Hanging

Step 1

Insert T-Top Gotcha Holder into the
AnoGotcha Shell. Fig. 1

Step 2

Insert saucer into top rail of the holder.
Note: It is easiest to slide the saucer into the
holder if you hold the Loop as close to the
saucer as possible. Fig. 2

Step 3

Push end caps into place. Fig. 3

Step 4

Snap the AnoGotcha Holder completely open
so that hinge is turned up as far as possible.
Insert poster into holder until top of poster
meets top of holder. To close snap the
AnoGotcha Holder shut. Fig. 4

2 Cable and

2

T-Top Gotcha

Saucer

16-0018SS

Figure 1 Figure 2

Figure 3 Figure 4

4

End Caps

06-5525

Step 5

Suspend poster. Fig. 5

Important note:

Please save and reuse the AnoGotcha Holder,
End Caps, and Cable and Saucer for future
projects.

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose
Displays, Ltd. Neither the manufacturer nor any sales agent may be held
liable for injury, loss or damage resulting from the use
of these products.
Part #02INSIMAnoGSQCableandSaucer

Incept-8 .23.02

Figure 5