Rose displays ANOGOTCHA FRAME ROUND User Manual

AnoGotcha™ Frame

Parts

AnoGotcha

Solid Rails

12AG400 T-Top Gotcha

Instructions for Hanging

Step 1

Install four (4) corner brackets (2 each
end) into solid rail opposite split rails.

Fig. 1

Step 2

Push remaining solid rails onto rail
from Step 1 to make three (3) sides
of the frame. Fig. 2

Figure 1

Instruction Sheet

Corner
bracketsSplit Rails

Figure 2

Step 3

Slide Gotcha into top and bottom
rails as shown. Fig. 3 & 4

Step 4

Install remaining corner brackets into
ends of split rails. Fig. 5

Step 5

Assemble split rails onto frame one
at a time. Fig. 6

AnoGotcha™ is a trademark of Rose Displays, Ltd. Neither the manufac­turer nor any sales agent may be held liable for injury, loss or damage
resulting from the use of these products. Part #02INSAnoGotchaFrame

Figure 3

Figure 4

Figure 5 Figure 6

Continued on next page

Incept-9.9.02

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoGotcha™ Frame

Parts

AnoGotcha

Solid Rails

12AG400 T-Top Gotcha

Instructions for Hanging

Step 6

Snap open Gotcha completely (if not
already open) so that bottom hinge is
turned up as far as possible.

Fig. 7

Step 7

Slip graphic into open rails of frame and
all the way into opposite edge of frame.

Fig. 8

Instruction Sheet

Corner

bracketsSplit Rails

Figure 7

Step 8

Snap Gotcha closed. Fig. 9

Figure 8

AnoGotcha™ is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting from
the use of these products. Part #02INSAnoGotchaFrame

Figure 8 (detail)

Figure 9

Incept-9.9.02

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]