Rose displays ANOFRAME SQUARE WITH NO HANGING User Manual

AnoFrame

Parts

TM

Square Profile Instruction Sheet

Corner

Brackets

Instructions For assembly

Step 1

Insert corner brackets into vertical
AnoFrame sides. Fig. 1 & Fig. 2.

Note: Assembly brackets tension
tabs face towards outside of frames.

Split rail side is made up of 2 separate
pieces.

Step 2

Assemble frame following steps in
Fig. 3 sliding sides together in the
order shown.

Step 3

Insert poster. Fig 4.

Note: The AnoFrame shown here is
a square profile. It is available in
either square or round profile.

AnoFrame Rail

12AF-100

Figure 1

solid rail

solid rail

Figure 3

AnoFrame

Split Rail

solid rail

split rails

Figure 2

split rails

Figure 4

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoFrameSQNoHanging

Revised 8.15.02

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoFrame

Parts

TM

Square Profile Instruction Sheet

Corner

Brackets

Instructions For assembly

Step 1

Insert corner brackets into vertical
AnoFrame sides. Fig. 1 & Fig. 2.

Note: Assembly brackets tension
tabs face towards outside of frames.

Split rail side is made up of 2 separate
pieces.

Step 2

Assemble frame following steps in
Fig. 3 sliding sides together in the
order shown.

Step 3

Insert poster. Fig 4.

Note: The AnoFrame shown here
is a square profile. It is available in
either square or round profile.

AnoFrame Rail

12AF-100

Figure 1

solid rail

solid rail

Figure 3

AnoFrame

Split Rail

solid rail

split rails

Figure 2

split rails

Figure 4

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAluFrameSQNoHanging

Revised 8.15.02

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]