Rose displays ANOFRAME SQUARE WITH MULTICLIPS User Manual

AnoFrame

Parts

TM

-Square Profile

Instruction Sheet

Corner

brackets

Instructions for assembly

Step 1

Insert corner brackets into vertical
AnoFrame sides. Fig. 1 & Fig. 2. Note:

Assembly brackets tension tabs face
towards outside of frames. Split rail side

is made up of 2 separate pieces.

Step 2

Squeeze sides of MultiClip together. Fig. 3

Step 3

Align the bottom rail of the MultiClip
with the top channel of the aluminum
holder. Slide MultiClip into rail. Fig. 4
Repeat steps 2 & 3 for second MultiClip.

AnoFrame rails

12AF-100

Figure 1

AnoFrame

split rails

MultiClips

1UP-0101

1

solid rail

Figure 2

2

split rails

Step 4

Assemble frame following steps in. Fig. 5
sliding sides together in the order shown.

Step 5

Insert poster. Fig 6.

The AnoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoFrameSQMC

Incept-7.31.02

Figure 3 Figure 4

solid rail w/

split rails

3

solid rail

Figure 5

4

Figure 6

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoFrame

Parts

TM

-Square Profile

Instruction Sheet

Corner

brackets

Instructions for assembly

Step 1

Insert corner brackets into vertical
AnoFrame sides. Fig. 1 & Fig. 2. Note:

Assembly brackets tension tabs face
towards outside of frames. Split rail side

is made up of 2 separate pieces.

Step 2

Squeeze sides of MultiClip together. Fig. 3

Step 3

Align the bottom rail of the MultiClip
with the top channel of the aluminum
holder. Slide MultiClip into rail. Fig. 4
Repeat steps 2 & 3 for second MultiClip.

AnoFrame rails

12AF-100

Figure 1

AnoFrame

split rails

MultiClips

1UP-0101

1

solid rail

Figure 2

2

split rails

Step 4

Assemble frame following steps in. Fig. 5
sliding sides together in the order shown.

Step 5

Insert poster. Fig 6.

The AnoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoFrameSQ

Incept-7.31.02

Figure 3 Figure 4

solid rail w/

split rails

3

solid rail

Figure 5

4

Figure 6