Rose displays ANOFRAME SQUARE WITH CABLE AND SAUCER User Manual

AnoFrame

Parts

Brackets

Corner

TM

Square Profile Instruction Sheet

Cable and

AnoFrame Rails

12AF-100

AnoFrame
Split Rails

Saucer

16-0018SS

Instructions For assembly

Step 1

Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid
side Ano rail. Insert one corner
bracket into each end of each split
side Ano rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

Step 2

Insert saucer into end of top Ano rail.
Fig. 3.
Note: It is easier to slide the saucer in
the Ano rail if you hold the cable as
close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.

solid rail

Figure 1

solid rail

split rails

Figure 2

Figure 4Figure 3

split rails

Step 4

Insert poster. Fig 6.

Note: The AnoFrame shown here is
a square profile. It is available in
either square or round profile.

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INANFSQCableandSaucer

Incept-8.23.02

solid rail

Figure 5

Figure 6

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoFrame

Parts

Brackets

Corner

TM

Square Profile Instruction Sheet

Cable and

AnoFrame Rails

12AF-100

AnoFrame
Split Rails

Saucer

16-0018SS

Instructions For assembly

Step 1

Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid
side Ano rail. Insert one corner
bracket into each end of each split
side Ano rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

Step 2

Insert saucer into end of top Ano rail.
Fig. 3.
Note: It is easier to slide the saucer in
the Ano rail if you hold the cable as
close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.

solid rail

Figure 1

solid rail

split rails

Figure 2

Figure 4Figure 3

split rails

Step 4

Insert poster. Fig 6.

Note: The AnoFrame shown here is
a square profile. It is available in
either square or round profile.

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INANFSQCableandSaucer

Incept-8.23.02

solid rail

Figure 5

Figure 6