Rose displays ANOFRAME ROUND WITH WINDOW MOUNTS User Manual

AnoFrame™

Parts

Instruction Sheet

Corner

brackets

Instructions for Hanging

Step 1

Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid
side Ano rail. Insert one corner
bracket into each end of each split
side Ano rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

Step 2

Slide the Wally Window Mounts
into the top rail of the AnoFrame
rail. Fig. 3

Step 3

Finish assembling frame following the
sequence in Fig. 4.

Step 4

Insert poster. Fig 5

AnoFrame rails

12AF-100

Figure 1

AnoFrame

split rails

Figure 3

split rails

Window Mounts

20-0038

solid rail

split rails

Figure 2

Note: For best performance when
first applied and occasionally
thereafter, press the middle of the
cup (on the cap) to “burp” extra
air out.

The AnoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoFrameWindowMounts

Incept-8.15.02

Figure 4

Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoFrame™

Parts

Instruction Sheet

Corner

brackets

Instructions for Hanging

Step 1

Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid
side Ano rail. Insert one corner
bracket into each end of each split
side Ano rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

Step 2

Slide the Wally Window Mounts
into the top rail of the AnoFrame
rail. Fig. 3

Step 3

Finish assembling frame following the
sequence in Fig. 4.

Step 4

Insert poster. Fig 5

AnoFrame rails

12AF-100

Figure 1

AnoFrame

split rails

Figure 3

split rails

Window Mounts

20-0038

solid rail

split rails

Figure 2

Note: For best performance when
first applied and occasionally
thereafter, press the middle of the
cup (on the cap) to “burp” extra
air out.

The AnoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSAnoFrameWindowMounts

Incept-8.15.02

Figure 4

Figure 5