Rose displays ANOFRAME ROUND WITH CABLE AND SAUCER User Manual

AnoFrame

Round Profile Instruction Sheet

Parts

Corner

Brackets

Instructions For assembly

Step 1

Locate the two split rails and the solid
rail that is the same length as the split
rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid side
Ano rail. Insert one corner bracket
into each end of each split side Ano
rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

TM

AnoFrame Rails

12AF-100

Figure 1

AnoFrame
Split Rails

Cable and

Saucer

16-0018SS

solid rail

split rails

Figure 2

Step 2

Insert saucer into end of top Ano rail.
Fig. 3.

Note: It is easier to slide the saucer in
the Ano rail if you hold the cable as
close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.

Step 4

Insert poster. Fig 6.

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSAnoFRCableandSaucer

Incept-8.23.02

solid rail

solid rail

Figure 3

Figure 5

Figure 4

split rails

Figure 6

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoFrame

Round Profile Instruction Sheet

Parts

Corner

Brackets

Instructions For assembly

Step 1

Locate the two split rails and the solid
rail that is the same length as the split
rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid side
Ano rail. Insert one corner bracket
into each end of each split side Ano
rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

TM

AnoFrame Rails

12AF-100

Figure 1

AnoFrame
Split Rails

Cable and

Saucer

16-0018SS

solid rail

split rails

Figure 2

Step 2

Insert saucer into end of top Ano rail.
Fig. 3.

Note: It is easier to slide the saucer in
the Ano rail if you hold the cable as
close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.

Step 4

Insert poster. Fig 6.

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSAnoFRCableandSaucer

solid rail

solid rail

Figure 3

Figure 5

Figure 4

split rails

Figure 6

Incept-8.23.02