Rose displays ANOFRAME ROUND WITH BALL CHAIN User Manual

AnoFrame

TM

Parts

Round Profile Instruction Sheet

Corner

Brackets

Instructions For assembly

Step 1

Locate the two split rails and the solid
rail that is the same length as the split
rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid side
Ano rail. Insert one corner bracket
into each end of each split side Ano
rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

Step 2

Insert one ball into end of top Ano
rail. Fig. 3.

Note: It is easier to slide the ball in
the Ano rail if you hold the chain as
close to the ball as possible. Fig 4.

AnoFrame Rails

12AF-100

Figure 1

Figure 3

solid rail

AnoFrame
Split Rails

Ball Chain

96-0302P

solid rail

split rails

Figure 2

Figure 4

Step 3

Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.

Step 4

Insert poster. Fig 6.

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSAnoFrameBallChain

Incept. 8.15.02

solid rail

Figure 5

split rails

Figure 6

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoFrame

TM

Parts

Round Profile Instruction Sheet

Corner

Brackets

Instructions For assembly

Step 1

Locate the two split rails and the solid
rail that is the same length as the split
rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid side
Ano rail. Insert one corner bracket
into each end of each split side Ano
rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner
brackets face towards outside of
frame.

Step 2

Insert one ball into end of top Ano
rail. Fig. 3.

Note: It is easier to slide the ball in
the Ano rail if you hold the chain as
close to the ball as possible. Fig 4.

AnoFrame Rails

12AF-100

Figure 1

Figure 3

solid rail

AnoFrame
Split Rails

Ball Chain

96-0302P

solid rail

split rails

Figure 2

Figure 4

Step 3

Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.

Step 4

Insert poster. Fig 6.

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSAnoFrameBallChain

Incept. 2.15.02

solid rail

Figure 5

split rails

Figure 6