Rose displays ANOFRAME ROUND NO LOAD WITH WALL HANGERS User Manual

AnoFrame

Round Profile Instruction Sheet

Parts

Corner

Brackets

Instructions For Assembly

Step 1

Insert corner brackets into vertical
AnoFrame side rails. Fig. 1

Note: Assembly brackets tension
tabs face towards outside of frames.

TM

AnoFrame Rails

12AF-100

Wall Mounting

Hangers

06-6067

top horizontal rail w/MultiClips

Step 2

Push top and bottom horizontal Ano
rails onto one side rail as shown in

Fig. 2

Step 3

Insert poster through side opening.
Fig 3

Step 4

Push final side rail into place as shown
in Fig 4.

Step 5

Install wall mounting hangers using a
Phillips head screwdriver. A plastic
expansion anchor is suggested for
drywall installations. Fig. 5

Step 6

Slide AnoFrame onto wall mounting
hangers. Fig 6

Note: The AnoFrame shown here is
a round profile. It is available in
either round or square profile.

Figure 1

Figure 3

Figure 5

horizontal rail

Figure 2

side rail

Figure 4

Figure 6

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSANFRNoLoadHanger

Incept-8.15.02

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AnoFrame

TM

Parts

Corner

Brackets

Instructions For Assembly

Step 1

Insert corner brackets into vertical
AnoFrame side rails. Fig. 1

Note: Assembly brackets tension
tabs face towards outside of frames.

Round Profile Instruction Sheet

Wall Mounting

AnoFrame Rails

12AF-100

Hangers

06-6067

top horizontal rail w/MultiClips

Step 2

Push top and bottom horizontal Ano
rails onto one side rail as shown in

Fig. 2

Step 3

Insert poster through side opening.
Fig 3

Step 4

Push final side rail into place as shown
in Fig 4.

Step 5

Install wall mounting hangers using a
Phillips head screwdriver. A plastic
expansion anchor is suggested for
drywall installations. Fig. 5

Step 6

Slide AnoFrame onto wall mounting
hangers. Fig 6

Note: The AnoFrame shown here is
a round profile. It is available in
either round or square profile.

Figure 1

Figure 3

Figure 5

horizontal rail

Figure 2

side rail

Figure 4

Figure 6

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSANFRNoLoadHanger

Incept-8.15.02