Rose displays ADVANCETRAK WITH METAL CLIP AND SCREWS User Manual

AdvanceTrak™

Parts

Instruction Sheet

12AR300

Aluminum Rail Metal Clip

Instructions for assembly

Note: Each graphic should already have
predrilled holes for snap rivets.

Step 1

Insert snap rivets into each predrilled hole.
Snap together. Fig. 1.

Step 2

Slide graphic into aluminum rails (top and
bottom). Rails will conceal snap rivets.

Fig. 2.

Step 3

Insert metal clips into channel of top
aluminum rail. Fig. 3. Slide into place.

Step 4

Secure aluminum rail to wall with screws
into the eye of the metal clips. Fig. 4.

Screw

End CapSnap Rivets

Figure 2Figure 1

Note: Repeat steps 1-4 for each of your
graphics. Be sure to hang graphics close
enough together so they can be joined.

Step 5

Insert end caps onto rails. Fig. 5.
Note: If you are using multiple panels,

do not insert end caps. Jump to Step 6

on next page.

Page 1 of 2

The AdvanceTrak™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #03INSAdvanceTrak

Incept-4.14.03

Figure 3

Figure 4

Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

AdvanceTrak™

Parts

Instruction Sheet

12AR300

Aluminum Rail

Instructions for connecting multiple panels

Step 6

On one panel, insert one joiner bar into
top channel of top aluminum rail and one
joiner bar into bottom channel of bottom
aluminum rail.

Slide joiner bar into corresponding
channels of connecting rails on second
panel. Fig. 6. Slide rails together. Fig. 7.

Repeat Step 6 for additional panels.
Note: Apply tape to the back of graphic

panels to secure seam.

Step 7

Insert end caps onto rails. Fig. 8.

Joiner Bar End Cap

Figure 6 Figure 7

Page 2 of 2

The AdvanceTrak™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #03INSAdvanceTrak

Incept-4.14.03

Figure 8

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]