Rose Vista AV User Manual

Vista AV DVI SWITCH

IN S TAL LATION AND

OPERATIONS

MANUAL

10707 Stancliff Road Phone: [phone]
Houston, Texas 77099 WWW.ROSE.COM

LIMITED WARRANTY

Rose Electronics® warrants the Vista AV DVI switch to be in good working order for one year
from the date of purchase from Rose Electronics or an authorized dealer. Should this product
fail to be in good working order at any time during this one-year warranty period, Rose
Electronics will, at its option, repair or replace the Unit as set forth below. Repair parts and
replacement units will be either reconditioned or new. All replaced parts become the property of
Rose Electronics. This limited warranty does not include service to repair damage to the Unit
resulting from accident, disaster, abuse, or unauthorized modification of the Unit, including
static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty
period to Rose Electronics or an authorized repair center providing a proof of purchase date. If
this Unit is delivered by mail, you agree to insure the Unit or assume the risk of loss or damage
in transit, to prepay shipping charges to the warranty service location, and to use the original
shipping container or its equivalent. You must call for a return authorization number first. Under
no circumstances will a unit be accepted without a return authorization number. Contact an
authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS P RO DUCT INCL UDI NG T HE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF
PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR
SOLE REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO
EVENT WILL ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING
ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT,
EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVI SE D OF
THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDE NTAL O R
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS , SO T HE AB OVE MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likel y
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and
Microsoft Windows are registered trademarks of Microsoft Corp. Any other trademarks
mentioned in this manual are acknowledged to be the property of the trademark owner.

Copyright  Rose Electronics 2010 All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any
means, electronic or mechanical, including photocopying and recording, without the prior written permission
of Rose Electronics.

Rose Electronics Part # MAN-VISAV
Printed In the United States of America – 1.0

TABLE of CONTENTS

Contents Page #

System Introduction ....................................................................................... 1

About this manual .......................................................................................... 1

Product Registration ...................................................................................... 1

Disclaimer ...................................................................................................... 1

Features ......................................................................................................... 2

Package contents ....................................................................................... 2

Rose Electronics web site .......................................................................... 2

Vista AV Models ............................................................................................ 3

Vista AV Installation ....................................................................................... 4

System Operation .......................................................................................... 5

Front panel control ..................................................................................... 5

Remote Serial Switching ............................................................................ 6

DDC Information / Learning ....................................................................... 6

Service ........................................................................................................... 7

Technical Support .......................................................................................... 7

Figure Page #

Figure 1. Models ............................................................................................ 3

Figure 2. Typical Installation .......................................................................... 4

Figure 3. Front Panel ..................................................................................... 5

Appendices Page #

Appendix A - Specifications ........................................................................... 9

Appendix B – Part numbers ......................................................................... 10

INTRODUCTION

System Introduction

Thank you for choosing the Vista AV from Rose Electronics for your DVI
video switching applications. The Vista AV is a very versatile product that
can switch the DVI-D inp ut s ignals from your PC or Mac computers to a
common DVI monitor. Selection can be made using the front panel push
buttons or by sending commands from a controlling computer to the RS232
port on the unit.
The Vista AV is available in four models, the 1x2, 1x4, 1x8, and 1x16. All
models operate and function in the same manor. When the input DVI-D
video source is selected, it is instantly displayed on the output DVI monitor
at resolutions up to 1920 x 1200.

About this manual

This manual covers the installation, configuration, and the operation of the
Vista DVI switching system. The system consists of the Vista DVI unit, the
connected computers, the output DVI monitor, and a computer to send
switching commands to the unit. The Installation section describes how all
components are interconnected to form a seamless video switching system.

Product Registration

Register your product for future updates at: www.rose.com/htm/online­registrationform.htm.

Disclaimer

While every precaution has been taken in the preparation of this manual, the
manufacturer assumes no responsibility for errors or omissions. Neither
does the manufacturer assume any liability for damages resulting from the
use of the information contained herein. The manufacturer reserves the
right to change the specifications, functions, or circuitry of the product
without notice.

The manufacturer cannot accept liability for damages due to misuse of the
product or other circumstances outside the manufacturer’s control. The
manufacturer will not be responsible for any loss, damage, or injury arising
directly or indirectly from the use of this product.

Vista AV Installation and Operations Manual 1