Rackview LCD Monitor
INSTALLATION AND
OPERATIONS MANUAL
Rackview LCD Monitor 17”
Rackview LCD Monitor 19”
Rackview LCD Monitor 20”
Rackview LCD Widescreen Monitor 17” (1080p)
Rackview LCD Widescreen Monitor 17” (1920 x 1200)
Rackview LCD Widescreen Monitor 19”
Rose Electronics 10707 Stancliff Road
Houston, Texas 77099
Phone (281) 9337673 WWW.ROSE.COM
.
Page 3
Rackview LCD Monitor WWW.ROSE.COM
LIMITED WARRANTY
Rose
Electronics warrants the
purchase
from Rose
Electronic
year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below. Repair
parts and
Electronics.
replacement
This limited warranty does not include service to repair damage to the Unit
disaster, abuse, or
units will be either
unauthorized modification
Limited
Warranty
Electronics
service may be obtained by
or an
authorized
If this Unit is delivered by mail, you agree to insure the Unit or assume the risk of loss or
prepay
shipping
charges to the
equivalent. You must call for a return authorization number first. Under no
without a return
authorization
information.
ALL EXPRESS A
MERCHANTABILITY
ND IMPLIED
AND
PERIOD OF ONE YEAR FROM THE DATE OF
OR
IMPLIED, W
LONG AN IMPLIED
ILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW
W ARRANTY
IF THIS PRODUCT IS NOT IN GOOD
YOUR SOLE
ROSE
REMEDY
ELECTRONICS
BE LIABLE TO YOU FOR ANY DAMAGES
INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER
DAMAGES ARISING OUT OF THE USE OF OR THE
ELECTRONICS
OR AN
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR
DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT
GIVES YOU
SPECIFIC
FROM STATE TO STATE.
IBM, AT, and PS
/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft
are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this manual are
to be the property of the
.
Copyright © Rose Electronics 2013. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including
photocopying and recording, without the prior written permission of Rose Electronics.
Rose Electronics Part # MAN-RV1-LCDAnn
Printed In the United States of America – Revision 1.0
Rackvie w Pr o du c t
to be in good working order for one year from the date of
s. Should this product fail to be in good working order at any time during this one-
reconditioned
of the
delivering
repair center providing a proof of
or new. All replaced parts
Unit, including
static discharge and power surges.
become
resulting
the property of Rose
from
this unit during the one-year warranty period to Rose
purchase
date.
damage
warranty
number. Contact an
W ARRANTIES
FITNESS
service location, and to use the original shipping container or its
FOR A
circumstances
authorized
repair center or Rose
FOR THIS PRODUCT INCLUDING THE
PARTICULAR
PURCHASE,
PURPOSE, ARE LIMITED IN
AND NO
WARRANTIES, W HETHER EXPRESS
will a unit be accepted
Electronics
for further
WARRANTIES
DURATION
LIMITATIONS
LASTS, SO THE ABOVE
W
ORKING ORDER AS W ARRANTED ABOVE,
SHALL BE
AUTHORIZED
REPLACEMENT
DEALER HAS BEEN ADVISED OF THE
LEGAL RIGHTS AND
trademark
owner.
OR REPAIR AS
YOU
MAY ALSO HAVE OTHER
LIMITATION
INABILITY
LIMITATION
MAY NOT APPLY TO YOU.
PROVIDED ABOVE.
INCIDENTAL
OR
TO USE SUCH
POSSIBILITY
OF
INCIDENTAL
APPLY
TO YOU. THIS W
RIGHTS W
IN NO EVENT WILL
CONSEQUENTIAL
PRODUCT,
EVEN IF ROSE
OF SUCH
OR
CONSEQUENTIAL
HICH MAY
in transit, to
ARRANTY
acknowledged
accident,
OF
TO A
ON HOW
VARY
W
indows
Page 4
Rackview LCD Monitor WWW.ROSE.COM
Table of Contents
Safety Instructions Page 5
Pre-Installation and Package Contents Page 6
Rackview Layout Diagram and Dimensions Page 7-9
Installation Page 10-11
OSD (On-Screen Display Control Panel) Operation Page 12-13
PIP and PBP Page 14-15
Product Options Page 16-17
Video Format Page 18
Specifications Page 19
Product Codes Page 19
Technical Support Page 20
Page 5
Rackview LCD Monitor WWW.ROSE.COM
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
•
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
• Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with
• When installing, place the equipment on a sturdy, level surface to prevent it from accidentally
falling and causing dam
• When the equipment is in an open position, do not cover, block or in any way obstruct the gap
between it and the
•
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the
•
voltage and current
cord should be higher than the one listed
•
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to
•
prevent it being damaged by transient overvoltage.
• Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled
on to the power
• Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate its warranty.
• If any part of the equipment becomes damaged or stops functioning, have it checked by qualified
service personnel.
Regulatory Notices Federal Communications C o mmission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interfer ence to radio or tele vision reception, w hich can be determ ined
by turning the equipment off and on, the user is enc ouraged to try to correct th e i nt erference by one or
more of the following measures:
•
Re-position or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
supply or on other hardware may cause damage, fire or electrical shock.
temperatures not exceeding 40º Celsius (104º Fahrenheit).
age to other equipment or injury to persons nearby.
power supply. Proper air convection is necessary to keep it from overheating.
labeled on the equipment’s electri cal ratings lab el. The voltage rating on the
on the equipment’s ratings label.
Page 6
Rackview LCD Monitor WWW.ROSE.COM
Pre-Installation and Package Contents
Before Installation:
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the mounting location has good ventilation, is out of direct sunlight, and away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
Unpacking:
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact your supp lier im mediately.
Package Contents:
1x Rackview LCD Unit
1x set of Mounting Bracket (sliding rails)
1x Power Cord
1x VGA Cable
1x User Manual
1x set of screws and washers for assembly
Product Operation:
a) Power On Procedure
• Power on the Rackview LCD Monitor (see power switch on back panel)
• Power on the CPU
b) Video Input Select Button (see OSD Section, Page 12)
The Rackview remembers the last valid video input selection, so if the CPU input has changed, the user needs
to re-select the video input.
• Locate the “Video Inp ut Selec t” button on the OSD display control panel
• Push the Video Input Sel ect butt on to togg le bet ween VG A and DVI Inp ut
• Select the appropriate Video Input format (VGA or DVI)
c) Cleaning Your Monitor
To clean your LCD safely, please follow these steps:
• Disconnect the power cord.
• Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
• Use only screen cleaning products designed for use with LCD monitors.
Page 7
Rackview LCD Monitor WWW.ROSE.COM
17.4 x 19.7 x 1.73 inch
23.1 x 29.8 x 4.7 inch
28 lb
41 lb
17.3 x 25.6 x 1.73 inch
23.4 x 33.9 x 5.5 inch
30 lb
39 lb
17.4 x 18.1 x 1.73 inch
23.1 x 29.8 x 4.7 inch
24 lb
33 lb
17.4 x 19.7 x 1.73 inch
23.1 x 29.8 x 4.7 inch
24 lb
33 lb
17.4 x 18.1 x 1.73 inch
23.1 x 29.8 x 4.7 inch
28.6 lb
37.4 lb
Rackview LCD Monitor - Layout Diagram & Dim e nsions
Layout for Rackview LCD Monitor (17”, 19”, 20”)
6
3
Model
RV1-LCDA17
RV1-LCDA19
RV1-LCDA20
RV1-LCDA17/DWS/HD
RV1-LCDA17/FHD
RV1-LCDA19/DWS
Product Dimension
(W x D x H) approx
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73 inch
441.6 x 500 x 44 mm
439.6 x 650 x 44 mm
441.6 x 480 x 44 mm
441.6 x 480 x 44 mm
441 x 460 x 44 mm
Packing Dimension
(W x D x H) approx
588 x 758 x 120 mm
23.1 x 29.8 x 4.7 inch
588 x 758 x 120 mm
595 x 860 x 140 mm
588 x 758 x 120 mm
588 x 758 x 120 mm
588 x 758 x 120 mm
The package weight can vary with accessories included
Net
Weight
10.5 kg
23 lb
12.5 kg
13.5 kg
11 kg
11 kg
13 kg
Gross
Weight
16.5 kg
36 lb
18.5 kg
17.5 kg
15 kg
15 kg
17 kg
Page 8
Rackview LCD Monitor WWW.ROSE.COM
Rackview LCD Monitor 17” and 19”
Rackview LCD Monitor 20”
Rackview LCD Chassis Dimensions
Unit: mm
1mm = 0.03937 inch
Page 9
Rackview LCD Monitor WWW.ROSE.COM
Rackview LCD Widescreen Monitor 17”
Rackview LCD Widescreen Monitor 19”
Page 10
Rackview LCD Monitor WWW.ROSE.COM
Installation of Rackview LCD Monitor 17” and 19” (including Wi de s cr een)
STEP 1
Insert the Left and Right rear-mounting slides into
the Rackview Console Drawer.
STEP 2
Measure the depth of the front and rear rack rails.
Align each rear-mounting slide to a suitable length
(depth).
STEP 3
Complete the Installation.
Fix the Rackview Console Drawer into the Rack
using the screws, cage nuts and cup washers
provided.
Page 11
Rackview LCD Monitor WWW.ROSE.COM
Installation of Rackview LCD Monit or 20”
STEP 1
Attach the left and right mounting brackets to the 19”
rack rails.
Adjust the mounting brackets to fit the rack.
STEP 2
Insert the LCD tray into the mounting bracket.
Pull and hold the left and right black arrow buttons on
the rails.
Return the LCD tray to the park position.
STEP 3
Fix the rear kit to the mounting brackets using the
screws provided.
STEP 4
Complete the installation
Fully tighten all screws, front and back, left and right.
Page 12
Rackview LCD Monitor WWW.ROSE.COM
On-Screen Display Operation ( OSD )
Rackview 17”, 19” and 20” Standard and Widescreen Models
Page 13
Rackview LCD Monitor WWW.ROSE.COM
Rackview 17” Widescreen models only
Page 14
Rackview LCD Monitor WWW.ROSE.COM
Picture In Picture and Pict ure By Picture Modes (PIP and PBP)
Rackview 17” Widescreen models only
1. Picture-In-Picture (PIP)
2. Screen Size
Note, the Rackview 17”/DWS/HD supports up to 1920x1080p.
The Rackview 17”/FHD supports up to 1920 x 1200
Page 15
Rackview LCD Monitor WWW.ROSE.COM
3. Picture-By-Picture (PBP)
4. PIP / PBP Source
Page 16
Rackview LCD Monitor WWW.ROSE.COM
Options for Rackview LCD Monitor, Standard and Widescreen Models
a) HDMI - HDMI 1.1, CEA-861-D
b) Audio - 3.5mm analog audio jacks, 2W +speakers
c) AV - S-Video + Composite, BNC (Standard 17”/19”/20” and Widescreen 19” only)
d) 3G/SDI - 3G/HD/SDI video (Widescreen 17” and 19” models only)
Select either DVI or HDMI connector.
Back panel of the Rackview LCD Monitor showing standard and optional connectors.
Back panel of the Rackview LCD Monitor showing standard and optional SDI connectors.
e) DC Power
Back panel of the Rackview LCD Monitor showing the location of DC power connector block.
Note: For all above options, the
70mm (2.75”) more than the standard chassis depth.
Rackview LCD Monitor chassis depth will be extended by approximately
Page 17
Rackview LCD Monitor WWW.ROSE.COM
Touchscreen Options
a) Resistive and Capacitive Touchscreens
Rackview 17”, Widescreen High Resolution (1920x1200) and 19” models only
a) Resistive Touchscreens
Rackview 17” Widescreen 1080p model
Back panel of Rackview LCD Touchscreen Monitor, showing the location of the connectors.
Note: For the touchscreen option, the Rackview LCD chassis depth will be ext en ded b y approx imately
70mm (2.75”) more than the standard chassis depth.
A bundled software setup disc is included with this option.
Please check with Rose Electronics for pricing and availability of these options.
Page 18
Rackview LCD Monitor WWW.ROSE.COM
Resolution/Refresh Rate
Resolution/Refresh Rate
Resolution/Refresh Rate
Resolution/Refresh Rate
1920 X 1080 X 60Hz
---
1360 x 768 x 60Hz
Video Format
Rackview LCD Monitor 17”, 19”, 20”
DVI-D / VGA
Input
Rackview LCD Monitor, 17” and 19”
--- 1600 x 1200 x 60Hz
--- 1440 x 1050 x 60Hz
--- 1440 x 900 x 60Hz
--- 1360 x 768 x 60Hz
1280 x 1024 x 60Hz / 75Hz 1280 x 1024 x 60Hz / 75Hz
1280 x 960 x 60Hz 1280 x 960 x 60Hz
1280 x 760 x 60Hz / 75Hz 1280 x 760 x 60Hz / 75Hz
1152 x 864 x 75Hz 1152 x 864 x 75Hz
1024 x 768 x 60Hz / 70Hz / 75Hz 1024 x 768 x 60Hz / 70Hz / 75Hz
848 x 480 x 60Hz 848 x 480 x 60Hz
800 x 600 x 60Hz / 72Hz / 75Hz 800 x 600 x 60Hz / 72Hz / 75Hz
720 x 400 x 70Hz 720 x 400 x 70Hz
640 x 480 x 60Hz / 72Hz / 75Hz 640 x 480 x 60Hz / 72Hz / 75Hz
640 x 400 x 70Hz 640 x 400 x 70Hz
640 x 350 x 70Hz 640 x 350 x 70Hz
Rackview LCD Monitor, 20”
Rackview LCD Widescreen Monitor 17” and 19”
DVI-D / VGA Input
LCD Monitor, 17” (1080p)
Resolution/Refresh Rate
1280 x 1024 x 60Hz / 75Hz 1280 x 1024 x 60Hz / 75Hz 1280 x 1024 x 60Hz / 75Hz
1280 x 960 x 60Hz 1280 x 960 x 60Hz 1280 x 960 x 60Hz
1280 x 760 x 60Hz / 75Hz 1280 x 760 x 60Hz / 75Hz 1280 x 760 x 60Hz / 75Hz
1152 x 864 x 75Hz 1152 x 864 x 75Hz 1152 x 864 x 75Hz
1024 x 768 x 60Hz / 70Hz / 75Hz 1024 x 768 x 60Hz / 70Hz / 75Hz 1024 x 768 x 60Hz / 70Hz / 75Hz
848 x 480 x 60Hz 848 x 480 x 60Hz 848 x 480 x 60Hz
800 x 600 x 60Hz / 72Hz / 75Hz 800 x 600 x 60Hz / 72Hz / 75Hz 800 x 600 x 60Hz / 72Hz / 75Hz
720 x 400 x 70Hz 720 x 400 x 70Hz 720 x 400 x 70Hz
640 x 480 x 60Hz / 72Hz / 75Hz 640 x 480 x 60Hz / 72Hz / 75Hz 640 x 480 x 60Hz / 72Hz / 75Hz
640 x 400 x 70Hz 640 x 400 x 70Hz 640 x 400 x 70Hz
640 x 350 x 70Hz 640 x 350 x 70Hz 640 x 350 x 70Hz
LCD Monitor, 17” (1920 x 1200)
1920 x 1200 x 60Hz ---
1360 x 768 x 60Hz ---
LCD Monitor, 19” (1440 x 900)
--- ---
--- 1440 x 900 x 60Hz
Page 19
Rackview LCD Monitor WWW.ROSE.COM
Rackview LCD
17” LCD
17” WS LCD
17” HI-RES LCD
19” LCD
19” WS LCD
20” LCD
Weight
23lbs (10.5kg)
24lbs (11kg)
24lbs (11kg)
28lbs (12.5kg)
28.6lbs (13kg)
30lbs (13.5kg)
Size
17” TFT
17.3” TFT
17.1” TFT
19” TFT
19” Wide TFT
20.1” TFT
Resolution
1280 x 1024
1920 x 1080p
1920 x 1200 HD
1280 x 1024
1440 x 900
1600 x 1200
Brightness c d/m2
250
300
210
250
250
300
Backlight
CCFL
LED
LED
LED
LED
CCFL
Colors
16.7M
1.07 B (10 Bit)
16.7M (8 bit)
16.7M
16.7M
16.7M
Contrast Ratio
1000:1
600:1
600:1
1000:1
1000:1
800:1
Viewing Angle H/V
160° x 160°
178° x 178°
130° x 110°
170° x 160°
160° x 160°
178° x 178°
Active Area (mm)
338 x 270
382 x 215
367 x 230
376 x 301
408 x 255
408 x 306
Screen Surface
Haze 25%. Hard
Anti Glare. Hard
Anti Glare. Hard
Haze 25%. Hard
Haze 25%. Hard
Anti Glare.Hard
Response Time - ms
5
35
30 5 5
16
PIP Function
No
Yes
Yes
No
No
No
Touchscreen-USB
Yes (Cap + Res)
Yes (Res only)
Yes (Cap + Res)
Yes (Cap + Res)
No
No
Video Signal
VGA (Analog 0.7Vp-p). DVI-D (TMDS single link)
Shock
Vibration
Audio (Option)
AC Power
100-240VAC, 50/60HZ
Consumption-Watt
Max 25 / Idle 5
Max 34 / Idle 5
Max 34 / Idle 5
Max 25 / Idle 5
Max 25 / Idle 5
Max 48 / Idle 5
Environmental
Approvals
FCC, CE, RoHS2, Reach
RV1-LCDA17
17” LCD Monitor
RV1-LCDA19
19” LCD Monitor
RV1-LCDA20
20” LCD Monitor
RV1-LCDA17/DWS/HD
17” LCD Monitor/Widescreen (1080p)
RV1-LCDA17/FHD
17” LCD Monitor/Full HD
RV1-LCDA19/WS
19” LCD Monitor/Widescreen
Rackview LCD Monitor - Specification
Monitor
Dimensions (in)
W x D x H (mm)
17.4x19.7x1.73
441.6 x 500 x 44
17.4x 18.9x1.73
441.6 x 500 x 44
3.5mm with L/R Speakers. Impedance 30KΩ / 750mV. Speaker Power – 2*2W
17.4x 18.9x1.73
441.6 x 500 x 44
10G acceleration (11ms duration)
5~500Hz 1G RMS random vibration
17.4x19.7x1.73
441.6 x 500 x 44
17.4 x18.1x1.73
441.6 x 460 x 44
17.3x25.6x1.73
440 x 650 x 44
Operating Temp
Storage Temp
Reltv Humidity
32°F–122°F / 0°C–50°C
23°F–140°F / -5°C–60°C
5–90% non-condensing
Part Numbers
Optional Items: (check with Rose Electronics for pricing and availability)
HDMI Interface
Audio Option
AV - S-Video Composite, BNC (
3G/HD/SDI (Widescreen 17” and 19” models only)
Touchscreen - Resistive Panel (Standard 17”, 19” , Widescreen 1080p and Widescreen 1920x1200 models only)
Touchscreen - Capacitive Panel (Standard 17” , 19” and Widescreen 1920 x1200 models only)
DC Voltage Option (12/24/48VDC)
Standard 17”/19”/20” and Widescreen 19” only)
Page 20
Rackview LCD Monitor WWW.ROSE.COM
Technical Support
If you are experiencing problems, or need assistance in setting up, configuring or operating your product,
consult the appropriate sections of this manual. If, however, you require additional information or
assistance, please contact the Rose Electronics Technical Support Department at:
Phone: (281) 933-7673
E-Mail: techsupport@rose.com
Web: www.rose.com
Technical Support hours are from: 8:00 am to 6:00 pm CST (USA), Monday through Friday.
Please report any malfunctions in the operation of this Unit or any discrepancies in this manual to the Rose
Electronics Technical Support Department.
WWW.ROSE.COM sales@rose.com (800) 333 9343
Rose USA (281) 933 7673 Rose Europe +49 (0) 2454 969442 Rose Asia +65 6324 2322 Rose Australia +61 (0) 421 247083
Rose Electronics 10707 Stancliff Road Houston, Texas 77099
© Copyright 2013 Rose Electronics. All rights reserved. Specifications subject to change without notice
Loading...