Rose CrystalLink USB 3.0 User Manual
CrystalLink USB 3.0
2-Port USB 3.0
100m Multimode Fiber Optic Extender
Installation and User Manual
FCC Radio Frequency Interference Statement Warning
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received including interference that may cause undesired
operation.
CE Statement
The CrystalLink USB3.0 is in conformity with European Standard EN 55022, EN 55024, EN 61000-3-2, and EN
61000-3-3.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
Contents
Introduction ............................................................................................................. 3
Product Contents ................................................................................................................................ 3
Features ................................................................................................................................................... 3
The Transmitter Unit .......................................................................................................................... 4
The Reveiver Unit ................................................................................................................................ 5
Installation Guide .................................................................................................... 6
Requirements ....................................................................................................................................... 6
Fiber Optic Link Cabling ................................................................................................................... 6
Installing the CrystalLInk USB3.0 System ................................................................................... 7
Preparing Your Site ............................................................................................................................. 7
Preparing Your Computer ................................................................................................................ 7
Connecting a USB 3.0 Device ........................................................................................................ 11
Installing the Receiver Unit ............................................................................................................ 11
Installing the Transmitter Unit ..................................................................................................... 11
Checking the Installation ............................................................................................................... 12
Compatibility ...................................................................................................................................... 12
Troubleshooting .................................................................................................... 13
Contacting Technical Support .............................................................................. 15
Warran
Obtaining Warranty Service ................................................................................. 16
Contacting Sales .................................................................................................... 16
Contacting Technical Support .............................................................................. 16
Technical Glossary ................................................................................................. 17
USB Connectors ................................................................................................................................. 17
DupTransmitter LC Crossover ....................................................................................................... 17
Specifications ......................................................................................................... 18
ty Information ........................................................................................... 15
4
Introduction
This document provides product information for the CrystalLink USB3.0, installation instructions,
troubleshooting guidelines, and instructions for contacting Rose Electronics regarding technical
support and warranty information.
The instructions in this document assume a general knowledge of computer installation procedures,
familiarity with cabling requirements, and some understanding of USB devices.
CrystalLink USB3.0 Product Contents
Your CrystalLink USB3.0 is packaged with:
• Transmitter unit (Local Extender)
• Receiver unit (Remote Extender)
• AC power adapter
• USB 3.0 cable
• Power cable
• User Document
Features
The CrystalLink USB3.0 enables users to extend beyond the standard 3m cable limit for USB 3.0 peripheral
devices. With the CrystalLink USB3.0, certain USB 3.0 devices can be located up to 100 meters from the
computer.
The CrystalLink USB3.0 supports only USB 3.0 devices. USB 2.0 and 1.1 devices will not function through this
extender.
The CrystalLink USB3.0 comprises two individual units: the Transmitter unit and the Receiver unit.
The Transmitter Unit
The Transmitter unit connects to the computer using a standard USB 3.0 cable. Power for this unit is provided
from the USB port on the host computer.
Front View
5
ITEM
TYPE
DESCRIPTION
5
6
7
Rear View
Power ON
Unit is powered properly.
1
Power OFF
Status Blinking (1Hz)
2
Status ON
Status OFF
Host ON
Unit is not powered or not powered properly.
Waiting for connection to Receiver.
Transmitter and Receiver are linked and operating normally.
Fault detected; power cycle required.
SuperSpeed Host detected on upstream facing port.
3
Host OFF
4
Power Port (optional)
SuperSpeed Host not detected.
Not required in normal operation. An optional 5V power supply
can be
connected to the Transmitter unit to provide power if the USB port on
the host PC is not capable of delivering sufficient power to the unit.
Configuration Port
USB 3.0 Type B port
Reserved for manufacturer use.
Used to connect the Transmitter unit to the host computer. Port accepts
locking or non-locking USB 3.0 Type B connectors.
Link Port (Dup Transmitter LC) Extension link Dup Transmitter LC fiber optic transceiver port.
6
The RECEIVER Unit
1
5
6
7
The Receiver unit has two USB Type A ports for USB 3.0 devices. The RECEIVER unit allows you to connect up
to two USB 3.0 devices directly. The RECEIVER unit is powered by an external AC adapter and can supply up to
900mA to each USB port.
Front View
Front View
Rear View
Rear View
ITEM TYPE DESCRIPTION
2
3
4
USB 3.0 Type A ports
Power ON
Power OFF
Status Blinking (1Hz)
Status ON
Status OFF
Host ON
Host OFF
Power Port
Used to connect USB 3.0 device(s) to the RECEIVER unit. Ports accept
locking or non-locking USB 3.0 Type A connectors.
Unit is powered properly.
Unit is not powered or not powered properly.
Waiting for connection to TRANSMITTER.
TRANSMITTER/RECEIVER are linked and operating normally.
Fault detected; power cycle required.
SuperSpeed Host detected on upstream facing port.
SuperSpeed Host not detected.
Connects to the locking AC power supply. Required on the Receiver unit
for correct operation.
Config Port
Link Port (Dup Transmitter
LC)
Reserved for manufacturer use.
Extension link Dup Transmitter LC fiber optic transceiver port.
Loading...