Rosco Vapour Plus Data Sheet
VAPOUR
Vapour Plus produces a massive blast of fog! And then…
PLUS
more fog. The colossal fogger in Rosco’s Vapour machine
family is able to ll the largest venues and create the most
impressive bursts of fog needed - yet it’s small enough to
mount in box truss and power from a single mains circuit.
Creating fog eects in stadiums, concert halls and auditoriums is a
struggle between speed and power. Fast ll time means more amperage
and careful monitoring to keep the heat exchanger hot. The sophisticated
software driving the Vapour Plus excels here, as it precisely balances the
heating and pump cycles to insure you have huge fog when you need it.
At 100% output, Vapour Plus will run for a full 60 seconds before a short
re-heating cycle is needed. And the giant output of this machine is
capable of consuming more than 7 liters of uid per hour!
Vapour Plus comes standard with a timed remote and digital DMX
controls. Multi-Link allows a single Vapour Remote Console to control up
to four Vapour, Vapour Plus, or V-Hazer units that are daisy-chained together via 3-pin XLR.
An innovative, rotating bottle carriage allows the Vapour Plus to be placed in either the traditional horizontal position or in a vertical
orientation. This feature, coupled with the massive fog blasts produced by the Vapour Plus, allows the machine to produce CO2-like burst
eects.
Repair technicians will appreciate the thoughtful engineering evident inside the Vapour Plus. Core components were designed to be
replaced quickly, and the electronics are fully separated from uid paths to minimize damage in the unlikely event of leaking or
contamination during transport
The Rosco Vapour Plus has been tested for use in professional theatrical productions and is included under the Equipment-Based Guidelines of the Equity-League Pension and Health Trust Funds. The Vapour Plus is also compliant with the Alliance of Motion Picture and
Television Producers Safety Bulletin #10..
SPECIFICATIONSFEATURES
• 1500 watt cast aluminum heat exchanger
• Constant blast fog output, with fast re-heating cycle
• Detachable remote control panel with 10’ (3m) cable
included
• On-board timer controls with 250 second duration
• Digital DMX interface with easy read display panel and
standard 5-pin XLR connection
• Multi-Link allows 4 machines to daisy chain from a single
remote control panel
• Optional closed-contact interface for show control
systems
• Air-input connection for easy cleaning and maintenance dramatically extends life of the heat exchanger
• Innovative bottle holder securely holds 4L and 5Lbottles
in both horizontal and vertical orientations.
• Modular, common-core component design simplifies
repair and maintenance - perfect for rental companies
• Dual stage thermal monitoring
• Designed to use Rosco’s entire range of Academy
Award® Winning fog fluids that have been used and
approved by professionals in every market
Part No. 200 83330 0100 Vapour Plus - 100v
200 83330 0120 Vapour Plus - 120v
200 83330 0240 Vapour Plus - 240v
Wattage 1500W
Power
Requirements
Output Maximum 7.2 Liter/Hour Fluid Consumption
Control On-Board, Detachable, Timed Remote -
Weight 30.2 lbs (11 kg)
Dimensions 15.7in x 17.2in x 11.3in
Housing Rugged 12g steel case
Approvals CE
Warranty 1 year
13.6A at 110 VAC/60hz
6.5A at 230 VAC/50hz
250 second duration, 10’ (3M) cable
Integrated, Digital DMX w/ 5-Pin XLR
Input & Pass-Thru
Optional Closed-Contact Interface
399mm x 438mm x 288mm
Chip resistant powder-coated paint
ETL / cETL pending
Listed for use by Actor's Equity
AMPTP Safety Bulletin #10 compliant
RoHS Compliant
RoHS
COMPLIANT
www.rosco.com
Loading...