Rosco Safe-T-Scope 7” Waterproof Monitor, Safe-T-Scope 7'', STSK7360 Installation & User Manual

Safe-T-Scope™ 7” Waterproof

Rearview Backup

Camera System

INSTALLATION/USER’S MANUAL

STSK7360

90-21 144th Place

Jamaica, NY 11435

1.800.227.2095

www.roscovision.com

Contents

Safeguard Instructions........................................................ 2

Features & Contents............................................................. 5

Installation Instructions....................................................... 6

Wiring Camera & Monitor...................................................... 7

Function & Operation............................................................ 8

Monitor.........................................................................................8

Split Screen & Camera Select.....................................................8

Normal/Mirror View....................................................................10

Distance Marker.........................................................................12

Trigger Input...............................................................................13

Setting................................................................................ 16

Video System..............................................................................16

Dimmer....................................................................................17

Picture........................................................................................17

Language...................................................................................17

Factory Settings.........................................................................18

Installation of U-Bracket...................................................18

Installation of Duckfoot Mount.........................................19

Connection...................................................................20

Figure Drawings...........................................................21-25

Specifications..........................................................26

- 1 -

WARNING

CAUTION

NOTICE

CAUTION

Safeguard Instructions

7”Waterproof Monitor

Please read the “Safety Rules“ carefully before using this product.
Following the safety rules prevents users from damages related with the
misuse of the product. It is very important to follow these safety rules.
We state “Caution“ and “Warning“ to clarify any potential risk for a
damage associated with the misuse of the product.

This information is for user’s reference for better usability.

This information is for preventing damage.

This information is for preventing bodily harm.
User should follow safety rules.

Install all components while power is off.

- It may cause electronic shock or malfunction.

Do not connect the product directly to the battery, use switched ignition.

- It may cause battery discharge.

Do not use this product with multi socket or extended adaptor.

- It may cause unexpected heating, re and malfunction.

When product is not in use for an extended period of time - unplug it.

- It may cause re by short circuit due to heating.

Do not place near magnetic devices.

- It may cause malfunction and trouble.

Please ensure that the monitor is installed with enough room
for heat emission.

- 2 -

- 3 -

Controls

1. Automatic brightness control sensor

2. Dimmer

3. Mode

4. Up

5. Down

6. Left

7. Right

8. Menu

9. Power

10. Stand by lamp

11. Speaker (Waterproof)

1

2

3

4

5

6

7

8

10

9

11

Do not install product in direct sunlight, high temperature, or extremely humid areas.

- It may cause electronic shock or malfunction.

Please use this product within the voltage range specied.

- It may cause electronic shock or malfunction.

Do not place this product where air bag operation may occur..

- It may cause malfunction of air bag or injury due from bag hitting monitor.

Do not clean the exterior of the monitor using harsh abrasives or solvents.

- It may cause change of surface or malfunction.

Do not place this product in high vibration areas without appropriate mounting.

- It may cause damage or malfunction.

Do not drill or screw directly into body.

- It may cause electronic shock, re and malfunction.

If the monitor is emitting smoke or a burning smell disconnect immediately.

- It may cause re.

Do not disassemble, repair or remodel.

- It may cause malfunction and injury, void warranty.

When the power cable cord touches a metal case, cover it with a friction tape.

- Short circuit or disconnection of wire may cause a re.

After nishing the installation, please check that the brake lamp, head lamp, and

wipers operate properly.

- 4 -

1

FEATURE

7”Waterproof Monitor

• Water Resistant (IP67), Aluminum housing

• 4 camera INPUT (NTSC/PAL)

• 2, 3, 4 Split Screen Function

• Dimmer sensor built in

• 7” WVGA (800 x 480) Wide LCD Panel

CONTENTS

7”Waterproof Monitor

• Before using this product, please check contents below. If there are
any missing parts please contact sales agent.

2

*Design & Specication are subject to change without notice.

Monitor

Monitor Cable

Power Adaptor

Cable

Trigger Extension

Cable (x4)

Instruction

Manual

U-Bracket

Sun Visor
(Optional)

Duckfoot Mount

- 5 -

INSTALLATION INSTRUCTIONS

IMPORTANT: For typical rear-view installation, the rear
camera MUST be connected to the distribution harness at
the connector marked “REVERSE”

Note: The following instructions are for typical rear-view
application.

STSC107 CAMERA

1. Attach camera bracket close to rear marker lights, centered on vehicle (see Fig. 1).
Attachment point must be sturdy enough to support camera and bracket.

2. We do not recommend mounting the camera near the lower area of the
vehicle (ex: bumper). This reduces the view of the camera and increases
the chance of physical damage to the camera.

3. Attach camera to bracket using screws provided. Adjust angle as indicated

in Fig. 2. (Use rear bumper and back of vehicle as a reference point.)

4. Wind deector may be installed. This deector is designed to reduce the

buildup of dust, dirt and moisture on the camera lens. (See Fig.3)

STSM207 MONITOR

1. Attach monitor inside vehicle in a location convenient to the driver

(ex: center of dash, overhead, or ush-mounted in dash).

2. Attach the “duckfoot“ bracket to the dashboard or to the headliner
using self-tapping screws and/or adhesive pad.

3. Fasten monitor to “duckfoot“ and adjust mounting angle to allow optimum driver
viewing comfort. (See Fig. 4.)

CABLE

1. The camera to cable connection is waterproof. Be sure to position the cable
properly. The male end attaches to the camera. The female end attaches to the
power/video/audio distribution harness, typically located under the dashboard.
(See Fig. 5.)

IMPORTANT: For typical rear-view installation, the rear
camera MUST be connected to the distribution harness at
the connector marked “REVERSE”

2. Do not run the cable over sharp edges or corners. Do not kink the cable.
Keep the cable away from hot and rotating parts.

3. Fasten all cable runs, and secure all excess cable.

- 6 -

WIRING CAMERA AND MONITOR

1. Connect the red wire to an ignition switched accessory (ex: radio) power source,
and connect the black wire to chassis ground. See wiring diagram for connections
(See Fig. 5.)

2. Before drilling, be sure no cable or wire is on the other side. Be sure to drill
a 20mm (0.8in) diameter hole only.

3. Feed as much cable as possible into vehicle and clamp securely. This
reduces the possibility of it being hooked or snagged.

4. Keep all cables away from HOT, ROTATING and ELECTRICALLY NOISY
components.

5. Camera: Drill a 20mm (0.8in) diameter hole into vehicle body near the camera and
bracket. Insert camera cable into vehicle (be careful not to kink cable) and t
grommet into hole. Apply sealant around grommet to increase resistance to water
penetration. Connect camera to the camera extension cable which runs inside
the vehicle.

6. Monitor: The monitor terminates in a 13-pin connector, which should be connected
to the mating 13-pin receptacle end of the power/video/audio distribution harness.

7. For typical rear-view installation, connect the camera extension cable
from the rear-view camera to the harness’s connector marked REVERSE.

8. For multi-camera installations, be sure to mark each extension cable properly and
connect to the appropriate harness connector marked CA1 or CA2. Bundle excess
cable together using a cable tie or electrical tape.

9. The green wire is the REVERSE trigger wire. In typical rear-view installations,
connecting this wire to the vehicle’s backup light circuit will activate the rear-view
image whenever the vehicle shifts into reverse.

10. FUEL TANKERS & OTHER SPECIALTY VEHICLES: All electrical equipment
tted to petroleum vehicles must be connected via battery master switch and must
be isolated from the battery while the vehicle are loading and unloading. For other
specialty vehicles, please check applicable code and regulations prior
to installation.

11. Always consult your dealer when tting any electrical or electronic equipment to a
vehicle tted with a CAN-bus or multiplex system.

IMPORTANT : For installations requiring multiple cameras,
or for installations not requiring typical rear-view images,
please refer to the wiring diagram (Fig.5) and the particu­lar vehicle’s electrical schematic for selection of proper
power and trigger connection points.

- 7 -

FUNCTIONS AND OPERATION

MONITOR

1. POWER
When the ignition is switched on, the monitor will be in standby mode (no image
will be on the screen), waiting for trigger signal.
When a trigger wire is energized by 12v power (such as backup lights turning on),
the image captured by the selected camera will appear on the monitor.

2. Pressing the power switch will change the monitor status from standby to
steady-on. Steady-on mode status will show rear cameras view.

3. VOLUME +/-

Adjust Speaker Volume
These buttons are also used to adjust the values within selected setting

of menu option

4. MODE
Switching the screen mode.
Press MODE once
Full screen changes to 2 split screen.
Press Mode twice
2 slpit screen changes to 3 split screen.
Press Mode three times
3 split screen changes to 4 split screen.
Press Mode four times
4 split screen changes back to full screen.

SPLIT SCREEN & CAMERA FUNCTION

1. SPLIT SCREEN SWITCH
In the split screen, press button to view the alternate split screen views

half view
1

tri view
1

quad view
1

quad view
2

tri view
2

half view
2

- 8 -

FUNCTIONS AND OPERATION - CONTINUED

2. CAMERA SELECTION
From the FULL SCREEN in the full screen, press the button to see

CAM1 > CAM2 > CAM3 > CAM4 > CAM1 . . . .

Press the “Mode“ buttton to display the screen information (Input Mode/Volume)

3. CAMERA SELECTION FOR SPLIT SCREENS
In the 2 split screen press the “Mode“ button to see the OSD(On Screen Display).
While the OSD is on select with the button the camera position
(Left or Right). Then press the arrow to select the camera of choice.

CAM1

CAM4 CAM4

CAM2

SPLIT SCREEN SETUP

SET LEFT

SET RIGHT

SPLIT SCREEN SETUP

CAM 1

CAM 2

CAM 3
CAM 4

CAM2

- 9 -

FUNCTIONS AND OPERATION - CONTINUED

4. CAMERA SELECTION FOR 3 SPLIT SCREENS
In the 3 split screen press the “Mode“ button to see the OSD(On Screen Display).
While the OSD is on, select with the button the camera position
(Left, Top or Bottom). Then press the button to select the camera of choice.

5. CAMERA SELECTION FOR 4 SPLIT SCREENS
In the 4 split screen press the “Mode“ button to see the OSD(On Screen Display).
While the OSD is on, select with the button the camera position (Top Left,
Top Right. Bottom Left or Bottom Right). Then press the arrow to select the
camera of choice.

NORMAL/MIRROR VIEW

1. CAM1 FULL SCREEN
From the CAM1 full screen press the “Mode” button. From the “MARKER SETUP”
screen press the “Mode” button again. Select the desired camera with the
then press button to change Normal/Mirror view.

SPLIT SCREEN SETUP

SET LEFT

SET TOP

SET BOTTOM

SPLIT SCREEN SETUP

CAM 1

CAM 2

CAM 3
CAM 4

CAM2

SPLIT SCREEN SETUP

SET LEFT

SET TOP

SET BOTTOM

SPLIT SCREEN SETUP

CAM 1

CAM 2

CAM 3
CAM 4

CAM2

MARKER SETUP

ON

OFF

MIRROR SET

CAM1 MIRROR

CAM2 MIRROR

CAM3 NORMAL

CAM4 MIRROR

CAM1

- 10 -

FUNCTIONS AND OPERATION - CONTINUED

2. CAM2 OR CAM3 FULL SCREEN
From the CAM2 or CAM3 full screen press the “Mode” button. From the
“CAM2 TRIGER SETUP” screen press the “Mode” button again. Select the
desired camera with the then press button to change
Normal/Mirror view.

3. CAM4 FULL SCREEN
From the CAM4 full screen press the “Mode” button. Select the
desired camera with the then press button to change
Normal/Mirror view.

4. SPLIT SCREENS (2/3/4)
From any multiple screen views press the “Mode” button. From the
“SPLIT SCREEN SETUP“ select a camera press the “Mode“ button again.
Select the desired camera with the then press button to change
Normal/Mirror view.

CAM4

MIRROR SET

CAM1 MIRROR

CAM2 MIRROR

CAM3 NORMAL

CAM4 MIRROR

CAM2TRIGGER SETUP

FULL SCREEN

SPLIT SCREEN

MIRROR SET

CAM1 MIRROR

CAM2 MIRROR

CAM3 NORMAL

CAM4 MIRROR

CAM2

- 11 -

SPLIT SCREEN SETUP

SET LEFT

SET RIGHT

MIRROR SET

CAM1 MIRROR

CAM2 MIRROR

CAM3 NORMAL

CAM4 MIRROR

CAM1

CAM2

FUNCTIONS AND OPERATION - CONTINUED

DISTANCE MARKER

1. ON SCREEN DISTANCE MARKER SETTING
In CAM1 full screen press the “Mode” button.
Select ON/OFF with button and then press button.

2. MARKER SELECTION
Press “Mode” button four times & select MARKER SELECT menu.
Press button, and switch marker pattern.

NOTE: Marker function only available when MARKER SETUP is on CAM1,
full screen mode.

IMPORTANT

• The onscreen distance markers shold be considered as a general reference to
assist the driver in assessing the distances depicted on the screen. The distance
markers have been designed based on the “CCD camera installation conditions“
listed in the next section, but differences in vehicle design and construction may
result in the actual installation condition or location being different from the
conditions listed. In such cases, the display location should be set at the closest
marker No.

• The markers may not indicate the exact position of the bumper, the vehicle’s
width or the distance to the rear. USE AS REFERENCE ONLY.

Vehicle width

(From bumper toward rear)

7M

MARKER
SELECT

5M

P1

3M

1M

Bumper position

CCD camera installation conditions

(distance marker input conditions)

(Unit mm)

Marker No

(Pattern)

Camera Install

Height

Vehicle

Width

P1 2.000 2.500

P2 2.250 2.300

P3 2.500 2.300

P4 2.750 2.300

P5 3.000 2.300

P6 3.250 2.300

P7 3.500 2.500

CAM4

MIRROR SET

ON

OFF

- 12 -

FUNCTIONS AND OPERATION - CONTINUED

3. MARKER ADJUSTMENT (ADJUSTING THE BUMPER POSITION)

- Press “Mode“ button 5 times, select MARKER ADJUST from the menu.

- Press button, select H/V. (H: horizontal, V: vertical)

- Press button, and switch marker patter.
( H= -10~ +10, V= -12~ +12, Default setting: H=0, V=0)

- After 10 seconds, set up screen disappears, and set up nishes.

* If there is no button operation, set up screen disappears even during set up process

TRIGGER INPUT

1. SCREEN SWITCH WHILE TRIGGER INPUT
What is “Trigger Input“ or “Trigger Signal“? This is when a circuit send s signal to
the monitor showing connected camera on screen during driving mode.
(ex. if driver uses left/right turn signal or reverse gear.)

*Example below is set with TRG1(Rear light) = CAM1
TRG2(Left Signal) = CAM2
TRG3(Right Signal) = CAM3
TRG4(ETC.) = CAM4

- 13 -

FUNCTIONS AND OPERATION - CONTINUED

2. If there is trigger input, the connected screen (Trigger input screen) is displayed as
full screen and the screen goes former one when the signal disappear.

3. In case of TRG2 and TRG3 input, by the OSD, the full or split screen could be
selected. If there is the TRG2(3) signal input, then CAM2(CAM3) and CAM1 split
screen are shown on the screen. With this function, Left (Right) and Rear side
could be checked.

In CAM2 full screen, press the “Mode” button to see OSD. Select split screen with
button and then press button. If there is the left signal input (TRG2), then CAM2 (Left)
in left side and CAM1 (Rear) in right side will be shown on the screen.

In CAM3 full screen, press the “Mode” button to see OSD. Select split screen with
button and then press button. If there is the left signal input (TRG3), then CAM1 (Rear)
in left side and CAM3 (Right) in right side will be shown on the screen.

4. When there is the TRG1(Rear light) input, CAM1 video will be shown on the screen.
with button, the 2 split screen CAM2/CAM1 or CAM1/CAM3 could be
displayed.

CAM4CAM1

CAM2

CAM1

CAM2

CAM1

CAM3

CAM2

CAM3

CAM2TRIGGER SETUP

FULL SCREEN

SPLIT SCREEN

CAM3TRIGGER SETUP

FULL SCREEN

SPLIT SCREEN

- 14 -

FUNCTIONS AND OPERATION - CONTINUED

5. When there is the TRG1(Rear light) input, CAM1 video will be shown on the screen.
with button, the 2 split screen CAM2/CAM1 or CAM1/CAM3 could be
displayed.

6. In case of light on emergency blinker (TRG2+TRG3), the monitor display CAM1~
CAM4 as quad split screen. And the screen goes former one when the signal
(light on emergency blinker) is disappeared.

The example is set with TRG1(Rear light)=CAM1 / TRG2(Left signal
light)=CAM2 / TRG3(Right signal light)=CAM3 / TRG4(etc)=CAM4.

CAM1CAM1

CAM2

CAM2

CAM3

CAM4

- 15 -

CAM2

Button

Button

CAM1 CAM3

CAM1

CAM1

FUNCTIONS AND OPERATION - CONTINUED

7. When there is input signal more than 2 triggers, the monitor display fully connected
screen (Trigger input screen) as the priority order. And the screen goes former one
when the signal is disappears, the rest will be display as the priority order.

* If the screen turns by trigger signal, the POWER, MENU & MODE buttons
are disabled.
* In the standby position if the trigger wire is activated the monitor will turn on.
The screen will turn off once the power is de-activated to the trigger wire.
The screen will then turn off when the trigger signal has gone off.

SETTINGS_________________________________________________________

VIDEO SYSTEM

1. NTSC/ PAL conversion
Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select “VIDEO SYSTEM“ and use to enter selection.

If using PAL system on NTSC system using county, it may cause a malfunction. The product
can convert NTSC / PAL system manually but it is not automatic. Before use, Please check
and set the system.

CAM3CAM1CAM4CAM1

TRIGGER PRIORITY ORDER
TRG1(Rear light) > TRG2+3(Emergency light) > TRG2(Left side light)
> TRG3(Right side light) > TRG4

NTSC system country: USA, CANADA, JAPAN, KOREA, TAIWAN, MEXICO, etc.

PAL system country : AUSTRALIA, GERMANY, U.K., NETHERLANDS, ITALY, etc.

- 16 -

SETTINGS_________________________________________________________

DIMMER

2. Dimmer sensor setting
Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select “DIMMER“ and use to enter selection.

Press the “DAY/NIGHT“ button to switch DAY >> NIGHT >> AUTO >> DAY
* Dimmer is set AUTO from the factory

PICTURE

3. Picture setup
Press the “Mode“ button until OSD menu “PICTURE SETUP“ appears.

Press button to select changes and use to adjust value.

* Each factory setting is preset to 50.

LANGUAGE

4. Language display selection
Press the “Mode“ button until OSD menu “PICTURE SETUP“ appears.

Press button to select changes and use to adjust value.

* Language selection: ENGLISH - FRENCH - GERMAN - ITALIAN - SPANISH

- 17 -

PICTURE SETUP

DIMMER DAY
CONTRAST 5 0
BRIGHTNESS 5 0
COLOR 50

05 TNIT
LANGUAGE E NGLISH
VIDEO SYSTEM NTSC

> TESER

PICTURE SETUP

DIMMER DAY
CONTRAST 5 0
BRIGHTNESS 5 0
COLOR 50

05 TNIT

LANGUAGE E NGLISH
VIDEO SYSTEM NTSC

> TESER

PICTURE SETUP

DIMMER DAY
CONTRAST 5 0
BRIGHTNESS 5 0
COLOR 50

05 TNIT
LANGUAGE E NGLISH
VIDEO SYSTEM NTSC

> TESER

SETTINGS_________________________________________________________

FACTORY SETTINGS

5. Reset
Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select “RESET“ and use to enter selection.
* All settings are initialized at the factory mode except for the video input. (NTSC/PAL)

INSTALLATION OF U-BRACKET_______________________________

- 18 -

Double side
adhesive tape

Screw hole

Double side adhesive tape

Ceiling Installation

Standard Installation

1. Ensure that the monitor is installed with enough room for heat emission. Install the
monitor stand with enclosed screws and double side adhesive tape as shown in the
above image.

2. Fix the monitor to the monitor stand rmly.

3. Sun Visor should be installed with 4 screws.

PICTURE SETUP

DIMMER DAY
CONTRAST 5 0
BRIGHTNESS 5 0
COLOR 50

05 TNIT
LANGUAGE E NGLISH
VIDEO SYSTEM NTSC

> TESER

INSTALLATION OF DUCKFOOT MOUNT__________________

1. Ensure that the monitor is installed with enough room for heat emission. Install the
monitor stand with enclosed screws and double side adhesive tape as shown in the
above image.

2. Fix the monitor to the monitor stand rmly.

3. Sun Visor should be installed with 3 screws.

Double side

adhesive tape

Double side

adhesive tape

- 19 -

Mini-din A type

DC IN

BLACK (CAM 1)

GREEN (CAM 2)

ORANGE (CAM 3)

GRAY (CAM4)

CAM 1

CAM 2

CAM 3

CAM4

MDM-094ADCM-051A

CONNECTION

- 20 -

Fig. 1

Camera mount in
suggested location

Camera mounting hole pattern

Mount camera assembly high.
(Centered)

- 21 -

Fig. 2

Typical monitor image of view from properly installed camera

Street

Position of camera

Vehicles behind truck

Rear Bumper

- 22 -

Fig. 3

Optional wind deector

- 23 -

Fig. 4

Mounting on ceiling

Mounting on the dash, console etc.

- 24 -

Fig. 5

GROUND WIRE (BLACK) To metal
point of the vehicle

POWER INPUT LEAD (RED) To
Ignition Switched Accessory

REVERSE Trigger 1
(GREEN)

CA2 Trigger 2
(WHITE)

Note: For typical single camera installation,
this trigger wire should be connected to the
vehicle’s “back up lights” circuit, and the
rear-view camera should be attached to the
connector marked “REVERSE”

CAM 2

- 25 -

SPECIFICATIONS

STSC107 CAMERA

PICK-UP DEVICE INTERLINE TRANSFER TYPE CCD
TV SYSTEM PAL/NTSC
PICTURE ELEMENTS 512(H) x 582(V) PAL
512(H) x 492(V) NTSC
SENSING AREA 0.2x0.1in (4.9mm x 3.7mm)
IMAGE SIZE 1/4 inch
SYNCHRONIZATION INTERNAL
HORIZONTAL RESOLUTION 420 TV LINES
REQUIRED ILLUMINATION 0 LUX MINIMUM/F1.2
SIGNAL TO NOISE RATIO MINIMUM 48dB(AT AGC OFF)
POWER SUPPLY 12Vdc
POWER CONSUMPTION 3.5W(AT 12Vdc)
CURRENT CONSUMPTION MAX. 200mA
LENS ANGLE 120º(D), 88º(H),66º(V)
OPERATION TEMPERATURE -15ºF to +160ºF
STORAGE TEMPERATURE -20ºF to +176ºF
WEIGHT 0.6Kg (0.41lb)
DIMENSIONS (W x H x D) 3 x 2 x 2in (75 x 48 x 49mm)

STSM207 MONITOR

SCREEN 5.0 inch (127mm) COLOR TFT-LCD
DEFLECTION ANGLE 50°(LEFT/RIGHT), 15°(TOP), 35°(DOWN)
POWER CONSUMPTION 8W/700mA MAXIMUM
POWER SOURCE 12-30Vdc
TV SYSTEM PAL/NTSC
VIDEO INPUT/OUTPUT COMPOSITE VIDEO SINGLE
1VP-P 75 OHM

RESOLUTION 960(H) x 234(V)
CONTRAST 350:1
BRIGHTNESS 400cd/m2
VIEWING ANGLE (U x D x R/L) 15 x 30 x 50
OPERATING TEMPERATURE -5°F to +150°F
STORAGE TEMPERATURE -13°F to +158°F
WEIGHT 0.4Kg (0.80lb)
OUTER DIMENSIONS 5.7 x 4.3 x1in (144 x 110 x 25mm)
(W x H x D) (without ush mount)

DISCLAIMER

The use of the STSK7360 Vehicle CCTV system should not in any way be used

as a substitute for careful and cautious driving. Always obey trafc laws and motor

safety regulations must always be adhered to.

Specications subject to change without any notice.

- 26 -

A Century of

Automotive Safety

90-21 144th Place

Jamaica, NY 11435

www.roscovision.com

Ph. 1.800.227.2095 Fx. 1.718.297.0323

Printed in China

Lit. P/N: 04242012