Rosco Safe-T-Scope STSK7565 Installation & User Manual

Safe-T-Scope™ 7” Rearview

Backup Camera System

INSTALLATION/USER’S MANUAL

STSK7565

90-21 144th Place

Jamaica, NY 11435

1.800.227.2095

www.roscovision.com

- 1 -

WARNING

1. To prevent electrical shock, DO NOT OPEN THE MONITOR CASE.
There are dangerous voltages inside the monitor. There are no user
serviceable parts inside.

2. Avoid exposing monitor to water, rain, moisture etc. It is NOT waterproof.
Any moisture inside the monitor could cause extensive damage.

3. Do not disassemble the camera or the monitor. This voids the
warranty. Disassembling the camera will compromise the waterproof seal.

STORAGE

1. Do not expose the monitor to excessive heat or cold. The storage
temperature of this machine is -13º~+158º F, and operating temperature is

-5º~+149º F.

2. Do not store or operate in humid environments.

.

1. Do not expose the monitor to excessive heat or cold. The storage temperature
of this machine is -30º~+80º C, and operating temperature is -20º~+70º. The
humidity is Rh 90%.

2. The monitor is not designed waterproof. Do not store or operate in moist or
wet environments.

1. High voltages exist within the monitor. Opening of monitor case is unsafe, and never necessary for operating purposes.

2. In case of any failure, please turn off the display at once, and notify our company or the corresponding dealer. The monitor
is made up of many precise electronic components. Any disassembly or modication may lead to damage and voiding
of warranty.

- 2 -

1. Disconnect the cable connection to monitor before cleaning the unit.

2. Use a mild household detergent and clean the unit with a slightly damp cloth.

GENERAL

1. This system is intended for use in automotive applications. Power source
should be an automobile storage battery (12V/24V).

2. Make sure all cables are connected properly. Improper cable connections
may damage the monitor. Remove the cable connection when you do not
intended to use the unit for a long period of time

3. Please install this system according to the instructions in this manual.

4. Connect the system to an ignition switched power source. Connection to an
unswitched battery source will reduce battery life.

- 3 -

INTRODUCTION

Please read this manual thoroughly. This manual contains instructions to make the
installation of the camera and monitor easier. The color backup camera system is a
supplement to standard rear-view mirror systems, and will provide additional rear-view
vision when installed and maintained properly. It is not intended in any way to be a

substitute for careful and cautious driving. All applicable trafc laws and motor vehicle

safety regulations must still be obeyed.

FEATURES

STSC150 CAMERA

• 360,000 pixel image sensor

• 0.5 Lux sensitivity (18 IR-LED)

• Auto White Balance (AWB)

• Field of view 110° Diagonal

• Back Light Compensation (BLC)

• Automatic electronic iris provides a clearer, more consistent image in low

and bright light

• Compact and lightweight design installs easily into most vehicles

• Waterproof/dustproof IP69K rating

• Wind deector reduces buildup of dirt on lens

STSM250 TFT LCD COLOR 7” MONITOR

• Menu button for Picture, System and Options • Backlit buttons

• Camera 1/ Camera 2 • Auto-dim

• Power/stand-by switch

• Built-in speaker

CONTENTS OF COMPLETE SYSTEM

1 Camera
with Accessories - Mounting Bracket w/ hardware

- Wind Deector

- 65’ Camera extension cable
1 Monitor
with Accessories - Sunshield

- “Duckfoot” universal bracket for surface-mounting of
monitor on dashboard or headliner, including adhesive pad

- Power / Video / Audio Distribution harness with reverse trigger

- U Bracket

COLOR BACKUP CAMERA SYSTEM
STSK7565

- 4 -